Solid axle Lockheed type - TR2, TR3 to TS13045
Necessário: 1
differential
Necessário: 1
oil filler on rear axle cover
Necessário: 1
for original filler plug
Necessário: 1
Necessário: 1
axle casing
Necessário: 1
Necessário: 1
differential
Necessário: 2
shaft to differential carrier
Necessário: 1
differential
Necessário: 2
sun gear
Always replace in pairs
Necessário: 2
with 3.70:1 ratio (teeth: 10/37)
Differential carrier holes must be drilled to 25/64" and countersink on both sides
Necessário: 1
with 4.10:1 ratio
Differential carrier holes must be drilled to 25/64" and countersink on both sides
Necessário: 1
crown wheel to differential carrier
Necessário: 10
differential carrier
Necessário: 2
differential carrier
Necessário: 2
bearing cap to axle casing
Necessário: 4
pinion, inner
Necessário: 1
differential - solid spacer between pinion bearings
Necessário: 1
pinion, outer
Necessário: 1
pinion, outer
Necessário: 1
propshaft - square type
Original type
Necessário: 1
propshaft - round variant
May replace original flange but need some modification
Necessário: 1
flange to pinion
Alternatives
Necessário: 1
flange to pinion
Alternatives
Necessário: 1
rear hub
TR2 from TS5556, TR3
Necessário: 2
wheel bearing
Necessário: 2
Vehicles fitted with disc wheels
Necessário: 2
Vehicles fitted with disc wheels
Necessário: 8
Vehicles fitted with disc wheels
Necessário: 8
LH
Vehicles fitted with wire wheels
Necessário: 1
RH
Vehicles fitted with wire wheels
Necessário: 1
Vehicles fitted with wire wheels
Necessário: 2
brake drum to hub - short
Vehicles fitted with wire wheels
Necessário: 6
brake drum to hub - long
Vehicles fitted with wire wheels
Necessário: 2
rear hub - internally splined
Necessário: 2
Mild EP
Necessário: 1
