Brake hydraulic - dual line brake system front/rear split with built in servo
for models with built in brake servo
complete, latest type, identification: plastic circlip fits piston
Necess¨¢rio: 1
upto approx 05/1992
Identification: fitting on master cylinder with metal circlip
Necess¨¢rio: 1
characteristic: 20.6 mm bore and fitting to master cylinder with plastic cirlip
approx 05/1992 on
Necess¨¢rio: 1
with filler cap, sealings and roll pin
Necess¨¢rio: 1
master brake cylinder - variant with sensor
Necess¨¢rio: 1
retaining Master brake cylinder to brake servo
Necess¨¢rio: 2
retaining brake servo to bracket
Necess¨¢rio: 3
plastic, for brake servo
carburettor cars
Necess¨¢rio: 1
plastic, for brake servo
Single Point Injection
Necess¨¢rio: 1
plastic, for brake servo
Multi Point Injection
Necess¨¢rio: 1
non-return valve to brake servo
Necess¨¢rio: 1
vacuum hose to inlet manifold
Necess¨¢rio: 1
vacuum hose to brake servo bracket
Necess¨¢rio: 1
f¨¹r St?sselstangen an Umlenkung
Necess¨¢rio: 2
and bracket
LHD
Necess¨¢rio: 1
pushrod brake through body
Necess¨¢rio: 1
up to (V) BD498952
could also be used on later cars
Necess¨¢rio: 1
(V) BD498953 on
alternative 13933 could be used
Necess¨¢rio: 1
for rear brake, fitted on bulkhead
Necess¨¢rio: 1
Befestigung Ventil an Spritzwand
Necess¨¢rio: 1
retaining valve to bulkhead
Necess¨¢rio: 1
mechanical, fitted to pedal box
Necess¨¢rio: 1