Cylinder head 4.2 petrol engine
RH
V8 to engine no. 40D09581B
Necess¨¢rio: 1
RH
V8 from engine no. 40D09582B
Necess¨¢rio: 1
LH
V8 to engine no. 40D09581B
Necess¨¢rio: 1
LH
V8 from engine no. 40D09582B
Necess¨¢rio: 1
orange
Necess¨¢rio: 1
oil filler neck
Models with air conditioning combined with power steering and detoxed engine
Necess¨¢rio: 1
rocker cover to cylinder head - short
Necess¨¢rio: 4
rocker cover to cylinder head - long
Necess¨¢rio: 4
engine breather
Necess¨¢rio: 1
filter engine breather
Necess¨¢rio: 1
"flame trap" engine breather
Necess¨¢rio: 1
standard specification
Necess¨¢rio: 2
tuftride hardened
Necess¨¢rio: 2
rocker shaft
Necess¨¢rio: 4
rocker shaft
Necess¨¢rio: 4
LH side, made from alloy - use with push rod 369293 (don't use the standard push rod)
Necess¨¢rio: 8
RH side, made from alloy - use with push rod 369293 (don't use the standard push rod)
Necess¨¢rio: 8
inlet manifold - standard tin specification
Necess¨¢rio: 1
inlet manifold - modern Composite gasket
Necess¨¢rio: 1
inlet manifold - modern Composite specification
Necess¨¢rio: 1
inlet manifold gasket ends - standard specification
Necess¨¢rio: 2
inlet manifold gasket ends - modern Composite specification
Necess¨¢rio: 2
inlet manifold seal
Necess¨¢rio: 2
exchange. Complete with valve guides, valves and springs
V8 from engine no. 40D to 40D09581B
Necess¨¢rio: 2
exchange. Complete with valve guides, valves and springs
V8 from engine no. 40D09582B
Necess¨¢rio: 2
composite gasket with partial serigraph covering. Bore size: 94 mm - identified by 2 rows of head bolts
Necess¨¢rio: 2
tapped for screw securing dipstick tube bracket
Necess¨¢rio: 1
models with air condition to engine no. 40D09581B
Necess¨¢rio: 13
models without air condition to engine no. 40D09581B
Necess¨¢rio: 14
V8 from engine no. 40D09582B
Necess¨¢rio: 14
V8 to engine no. 40D09581B
Necess¨¢rio: 6
96 mm long
V8 from engine no. 40D09582B
Necess¨¢rio: 6
alternator bracket
models wit air condition
Necess¨¢rio: 1
stainless steel, diameter: 1.57"
Necess¨¢rio: 8
gas flowed type made from 214N stainless steel with stepped stem with 113 mm length and 34 mm head diameter - for 3.9 V8 Efi and 4.2 V8 LSE engines
Necess¨¢rio: 8
inlet and exhaust valve. Steel type
Necess¨¢rio: 16
exhaust, standard
Necess¨¢rio: 8
exhaust, +0.010"
Necess¨¢rio: 8
- upper position
Necess¨¢rio: 16
inlet valve
to engine no. 38D23045A
Necess¨¢rio: 8
inlet valve
from engine no. 38D23046A
Necess¨¢rio: 8
non-setting gasket and jointing compound
Necess¨¢rio: 1
°ä´Ç²Ô³Ù±ð¨²»å´Ç: 80 ml (125,12 ? / 1000 ml)
with head gaskets with 2 rows for head bolts
Classic 4.2 V8 LSE from VIN...LA647645 (1994-96)
Necess¨¢rio: 1
with head gaskets with 2 rows for head bolts
Classic 4.2 V8 LSE from VIN...LA647645 (1994-96)
Necess¨¢rio: 1