'A' type Overdrive (1959-65)
with pins assembly
Necessário: 1
overdrive clutch - supplied in sets of 8
2.4 and 3.4
Necessário: 1
overdrive clutch - supplied in sets of 12
3.8
Necessário: 1
sliding member - reconditioned, in exchange
Exchange only
Necessário: 1
ball bearing to thrust ring - large
Necessário: 1
ball bearing to thrust ring - small
Necessário: 1
overdrive - reduction: 28%
Necessário: 1
bronze - at rear of sun wheel
Necessário: 1
bronze - at front of sun wheel
Necessário: 1
overdrive - including roller set
Necessário: 1
for unidirectional clutch - set of 12
Necessário: 1
uni directional clutch
Necessário: 1
uni directional clutch - bronze, 0.125" thick
Necessário: 1
annulus bearing - 0.166", steel
Necessário: 1
annulus bearing - 0.156", steel
Necessário: 1
annulus bearing - 0.151", steel
Necessário: 1
annulus bearing - 0.146", steel
Necessário: 1
in overdrive - version with 15 teeth
Necessário: 1
retaining speedometer bearing
Necessário: 1
extension to front casing
Includes in Gearbox and overdrive gasket set 26788
Necessário: 1
behind gearbox bearing
Necessário: 1
with o-ring, for A-type overdrive - diameter 1.3/8"
Necessário: 2
overdrive operating piston - diameter 1.3/8"
Necessário: 1
for nut
Necessário: 4
at top of overdrive casing
Necessário: 1
unter operating valve plug
Included in gearbox and overdrive gasket set 26788
Necessário: 1
operating valve
Necessário: 1
Main operating valve
Necessário: 1
for A-type overdrive oil pump. Diameter: 3/8"
Necessário: 1
securing oil pump plunger in body
Necessário: 1
for 'A' type overdrive oil pump
Necessário: 1
securing oil pump body
Necessário: 2
oil pump in 'A' type overdrive
Necessário: 1
on drain plug
included in gearbox and overdrive gasket set 26788
Necessário: 1
for non return valave
Necessário: 1
securing solenoid
Necessário: 2
between solenoid bracket and overdrive casing
included in gearbox and overdrive gasket set 26788
Necessário: 1
securing solenoid bracket to studs at side of front case
Necessário: 2
on set screw securing solenoid bracket
Necessário: 2
accumulator piston - for 'A' type Overdrive
2.4/3.4
Necessário: 1
for accumulator housing
sometimes onley 1 required
Necessário: 2
for accumulator piston - set of 6
2.4/3.4
Necessário: 1
for accumulator piston - set of 6
3.8
Necessário: 1
with piston rings assembly. Outer dimeter: 1.1/8"
Mark II 2.4 and 3.4 with A-Type overdrive (1959-65)
Necessário: 1
modified variant with 'O' ring. Outer dimeter: 1.1/8"
Mark II 2.4 and 3.4 with A-Type overdrive (1959-65)
Necessário: 1
with piston rings assembly. Outer dimeter: 1.1/2"
3.8
Necessário: 1
accumulator piston, length: 160 mm
3.8
Necessário: 1
accumulator piston
2.4/3.4
Necessário: 1
including overdrive gaskets
Necessário: 1
including overdrive gaskets and oil seals
Necessário: 1
with 84" length
LHD models
Necessário: 1
with 60" length for LHD models
Necessário: 1
'A' type, model 28/61369 - reconditioned, in exchange
2.4
Necessário: 1
'A' type, model 28/61474 - reconditioned, in exchange
3.4
Necessário: 1
'A' type, model 28/63028 - reconditioned, in exchange
3.8
Necessário: 1
