Cylinder head
RH
to engine no.7S3904
RH
from engine no. 7S3905
Requis: 1
LH
from engine no. 7S3905
Requis: 1
RH - modern high tech version
Requis: 1
LH - modern high tech version
Requis: 1
droite - revisionné, en échange
Requis: 1
gauche - revisionné, en échange
Requis: 1
camshaft block - length: 1.1/2"
Requis: 12
camshaft cover to cylinder head
Requis: 12
retaining camshaft bearing caps
Requis: 28
gauche (B-bank)
Requis: 1
couvercle arrière du vilebrequin au bloc moteur - diamètre: 5/16"
Requis: 4
RH - exchange. Full recondition fitting of all new valves, springs and guides, new cam bearings.
Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
LH - exchange. Full recondition fitting of all new valves, springs and guides, new cam bearings.
Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
exhaust valve +0.003" (1st oversize). Steel type
Requis: 12
exhaust valve +0.005" (2nd oversize). Steel type
Requis: 12
inlet valve +0.003" (1st oversize). Steel type
Requis: 12
inlet valve +0.005" (2nd oversize). Steel type
Requis: 12
cylinder head - uprated flange nut with 3/8" UNF thread and 9/16" AF spanner size
Requis: 27
cylinder head nut - uprated version
Requis: 24
cylinder head - uprated version
Requis: 28
covering unsued water outlet flanges
Requis: 4
side of cylinder head
Requis: 14
rear of cylinder head
Requis: 2
exhaust, hardened, semi finished. For lead free applications
Requis: 12
inlet, hardened, semi finished. For lead free applications
Requis: 12
réplique avec un diamètre original de 34,9 mm et une hauteur de 22,2 mm
Requis: 24
pour soupapes pour les moteurs Jaguar XK6 et V12 (diamètre 17,44 mm <> 0,6126 pouce)
en haut, pour soupape d'admission et soupape d'échappement - reconstruction
Requis: 24
jusqu'au numéro de moteur 7S7377 (1971-73)
Requis: 1
à partir du numéro de moteur 7S7378 (1973-74)
Requis: 1
flexible, steel braided, feed pipe from block to cylinder head
Requis: 1
at adaptor oil pressure switch
from engine no 7S7378
Requis: 1
from engine no. 7S7378
Requis: 2
oil pressure switch, at cylinder head
from engine no. 7S7378
Requis: 1
- length:1.1/4" UNC
from engine no. 7S7378
Requis: 2
100 PSI
Requis: 1
oil pressure switch
from engine no. 7S7378
Requis: 1
or warning light in warning lamp cluster
from engine no. 7S7378
Requis: 1
chromé. Fixation cache de soupapes et des culasses
Requis: 1
avec joints de tête en matériaux Cometic CFM avec alésage de 93 mm et épaisseur de montage de 1,5 mm
Requis: 1
