Cylinder block 4.2 litre - later models from October 1968 onwards
usado
Jaguar: Series 2 a partir do n? de motor 7R1915(OTS/FHC) e 7R35389(2+2)
Necess¨¢rio: 1
cylinder head - length: 6.3/8"
Necess¨¢rio: 4
cylinder head - length: 12.15/16"
Necess¨¢rio: 3
cylinder head - length: 12.11/16"
Necess¨¢rio: 6
cylinder head, with alignment dowel - length: 13"
Necess¨¢rio: 1
cylinder head - length: 6.13/16". Variant with 9/16" UNF thread on block side for badly worn cylinder blocks
With 9/16" UNF thread on block side for badly worn cylinder blocks - quantity as required
oil gallery - galvanised version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Necess¨¢rio: 6
oil gallery - brass version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Necess¨¢rio: 6
RH and LH side of block - 1.1/4"
Necess¨¢rio: 4
external heater aperture
Necess¨¢rio: 1
oil gallery - thread: 7/8" UNF
Necess¨¢rio: 1
cylinder block RH side - for oil filter flange
Necess¨¢rio: 1
cork, distributor shaft to cylinder block
Necess¨¢rio: 1
in cylinder block, behind chain tensioner
Necess¨¢rio: 1
in cylinder block - diameter: 5/16"
Necess¨¢rio: 2
on LH side of cylinder block
Necess¨¢rio: 1
for oil feed pipe - length: 7/8"
Necess¨¢rio: 1
cylinder block, rear
Necess¨¢rio: 1
rear cover plate on cylinder block
Necess¨¢rio: 1
retaining rear blanking plate
Necess¨¢rio: 6
retaining rear blanking plate
Necess¨¢rio: 6
retaining rear blanking plate
Necess¨¢rio: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Necess¨¢rio: 2
rear rope seal
Necess¨¢rio: 1
crankshaft rear - for vehicles with ribbed aluminium oil sump with smooth oil seal bracket on the outside and for all 4.2 engines. It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine overhaul these changes can be easily done while grinding the crankshaft
Necess¨¢rio: 1
centre - length: 3/4"
Necess¨¢rio: 1
rear rope seal retainer
Necess¨¢rio: 2
gearbox to cylinder block
Necess¨¢rio: 2
main bearing cap
Necess¨¢rio: 14
in cylinder block - diameter: 5/16"
Necess¨¢rio: 7
main bearing cap - diameter: 1/2"
Necess¨¢rio: 7
for timing cover - improved teflon version
Necess¨¢rio: 1
matt black
Quantity as required
°ä´Ç²Ô³Ù±ð¨²»å´Ç: 400 ml (30,00 ? / 1000 ml)