Gearbox - inner
with gear wheels, coarse toothing. Identify by: 29, 13 and 24 teeth
600 from engine no. 758493 and 600 D 1. Series (1959-64)
Requis: 1
with gear wheels, coarse toothing. Identify by: 31, 13 and 25 teeth
600 Multipla from engine no. 765151 to 1964 (1959-64)
Requis: 1
with gear wheels, fine toothing. Identify by: 29, 13 and 24 teeth
600 D 2. Series and 3. Series plus Multipla (1964-69)
Requis: 1
2nd speed, on main shaft
600 from engine no. 758493 and 600 D plus Multipla from engine no. 765151 (1959-69)
Requis: 1
2nd speed, on main shaft
600 from engine no. 758493 and 600 D plus Multipla from engine no. 765151 (1959-69)
Requis: 1
2nd speed, on main shaft
600 from engine no. 758493 and 600 D plus Multipla from engine no. 765151 (1959-69)
Requis: 1
on main shaft
600 from engine no. 758493 and 600 D plus Multipla from engine no. 765151 (1959-69)
Requis: 1
connecting main shaft and first motion shaft. Identify by: Coarse toothing
600 from engine no. 514533 and 600 D 1. Serie plus Multipla (1958-64)
Requis: 1
connecting main shaft and first motion shaft. Identify by: Fine toothing
600 D 2. Series and 3. Series plus Multipla (1964-69)
Requis: 1
coupling shaft
Requis: 1
input shaft
Requis: 1
gearbox. Identify by: Coarse toothing
600 from engine no. 512811 and 600 D 1. Series plus Multipla (1958-64)
Requis: 1
gearbox. Identify by: Fine toothing
600 D 2. Series 3. Series plus Multipla (1964-69)
Requis: 1
reverse gear
Requis: 1
reverse gear
Requis: 1
reverse gear
Requis: 1
1st and 2nd Speed
Requis: 1
for 2nd, 3rd and 4th speed
Requis: 3
3rd Speed
Requis: 1
sliding sleeve 3rd/4th gear
Requis: 3
3rd and 4th speed
Requis: 1
1st Speed + reverse gear, version with 44 teeth
Requis: 1
4th gear. Version with 36 teeth
Requis: 1
4th speed and pinion. Identify By: 32 mm inner diameter
Requis: 1
ingranaggio conico, posizione anteriore. Caratteristica: 70 mm di diametro esterno
Requis: 1
pinion, front. Identify by: 70 mm outer diameter
600 D (1960-69)
Requis: 1
gear wheels on gear shaft. Thickness: 2.20 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.25 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.30 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.35 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.40 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.45 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.50 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.55 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.60 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.65 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.70 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.75 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.80 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.85 mm
Requis: 1
gear wheels on gear shaft. Thickness: 2.90 mm
Requis: 1
4th speed and pinion. Identify By: 32 mm inner diameter
Requis: 2
Requis: 1
démultiplication 4,875:1 (8/39 dents)
Requis: 1
démultiplication 4,875:1 (8/39 dents)
600 D et Multipla (1960-69)
Requis: 1
speedometer pinion. Identify by: retaining without ball
600 1. Series (1960-64)
Requis: 1
speedometer pinion. Identify by: retaining with ball
600 2. Series and 3. Series (1964-69)
Requis: 1
retaining gear
600 2. Series and 3. Series (1964-69)
Requis: 1
connecting gear lever with selctor fork rods
600 from engine no. 758493 and 600 D plus Multipla from engine no. 765151 (1959-69)
Requis: 1
reverse speed
600 and 600 D 1. Series (1955-64) plus Multipla (1956-64)
Requis: 1
reverse speed
600 D 2. Series and 3. Series plus Multipla (1964-69)
Requis: 1
reverse speed
Requis: 1
M8
Requis: 1
M8
Requis: 1
M8
Requis: 3
M8
Requis: 1
3-piece kit with gearbox main shaft, reverse gear wheel and gear wheel 1st gear, fine toothing. Identify by: Main shaft 24 ,13 and 29 teeth
600 D 2. Series and 3. Series plus Multipla (1964-69)
Requis: 1
gear box in a set with 4 pieces
600 D and Multipla (1960-69)
Requis: 1
