Culata - Motor de 3 apoyos
with breather pipe
18G engines
Alloy rocker covers
Necesarios: 1
no breather pipe
18GA engines
Alloy rocker covers
Necesarios: 1
on rocker cover 'MG'
Alternatives
Necesarios: 1
on rocker cover - 'MG'
Alternatives
Necesarios: 1
on rocker cover 'patents'
Alternatives
Necesarios: 1
on rocker cover - 'patents'
Alternatives
Necesarios: 1
plastic, non vented
18G engine
Necesarios: 1
metal
18G engine
Necesarios: 1
for oil filler cap
18G engine
Necesarios: 1
black plastic, with breather
18GA engine
Necesarios: 1
red plastic, vented
18GA engine
Necesarios: 1
Not suitable for alloy rocker covers
Necesarios: 2
chrome plated
Necesarios: 2
Necesarios: 2
chrome plated
Necesarios: 2
screwed - in rocker shaft
Necesarios: 1
plain - in rocker shaft
Necesarios: 1
with centre tapped hole
Necesarios: 1
for rocker shaft adjusting screw
Necesarios: 1
double coil
Necesarios: 1
rocker shaft - short
Necesarios: 2
rocker shaft - long
Necesarios: 2
exchange. Identification: Double valve springs
Necesarios: 1
nueva parte. Cabezal listo para montar con v¨¢lvulas, gu¨ªas de v¨¢lvula, resortes de v¨¢lvula simples y anillos de asiento de v¨¢lvula integrados. Versi¨®n con orificio central para el aceite para el soporte del balanc¨ªn
Necesarios: 1
nueva parte. Cabezal listo para montar con v¨¢lvulas, gu¨ªas de v¨¢lvula, resortes de v¨¢lvula dobles y anillos de asiento de v¨¢lvula integrados. Versi¨®n con orificio central para el aceite para el soporte del balanc¨ªn
Necesarios: 1
thermostat housing
Necesarios: 3
for temperature sensor
Necesarios: 1
heater valve
When heater not fitted
Necesarios: 1
manifold to cylinder head - 1.7/8"
Necesarios: 4
manifold to cylinder head - 1.5/8" long
18GB to 18GG and 18GK engines (to October 1971)
Necesarios: 2
classic soft material gasket on metal layer with 1.5 mm thickness
Necesarios: 1
classic copper gasket on metal layer with 1 mm thickness
Necesarios: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed and 1.2 mm thickness. Please note: do not re-torque cylinder head when using this gasket
Characteristic: do not re-torque cylinder head when using this gasket
Necesarios: 1
inlet valve. Steel type
Necesarios: 4
inlet valve. Bronze type for lead free applications
Necesarios: 4
exhaust valve. Steel type
Necesarios: 4
exhaust valve. Bronze type for lead free applications
Necesarios: 4
inner - separately
Necesarios: 8
outer - separately
Necesarios: 8
compuesto para junta universal que no se endurece
Necesarios: 1
Contenido: 80 ml (125,12 GBP / 1000 ml)
with soft material head gasket on metal layer
Necesarios: 1
with copper head gasket on metal layer
Necesarios: 1
with soft material head gasket on metal layer
Do not re-torque cylinder head when using this gasket set
Necesarios: 1
with modern composite cylinder head gasket with 83.00 mm + 0.5 mm max. bore size
Necesarios: 1