Cylinder block and crankshaft - Mk10 3.8
N¨¹ral (Hepolite) Piston
+0.040" oversize. Specifications: 3.8 engine, 3-ring piston, standard bore size: 3.425", compression ratio: 8.0:1
More info...
Product number: 202535
E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)
Piston ring set
standard size. 3.8 engine - fits 3 ring piston with 8:1 and 9:1 compression ratio. 2 compression rings, 1 oil ring
More info...
Product number: 318147
E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)
Cylinder liner
for 3.8 engine - nominal dimensions: 3.425 x 3.562 x 6.980"
More info...
Product number: 206961
E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)
Gudgeon pin
More info...
Product number: 206926
Pulley
crankshaft - variant for "w" type (duplex) fan belt
More info...
Product number: 206910
E-Type 3.8 from engine no. R5250 and all 3.8 with engine no. RA (1963-64) ? Mark II 3.4 from engine no. KH4023, 3.8 from engine no. LC1672 and 340 from engine no. 7J50001 (1963-69) ? Mk10 3.8 (1961-64) ? S-Type 3.4 and 3.8 (1963-68)
Pulley
crankshaft - lightweigth alloy version for "w" type (duplex) fan belt
More info...
Product number: 315487
E-Type 3.8 from engine no. R5250 and all 3.8 with engine no. RA (1963-64) ? Mark II 3.4 from engine no. KH4023, 3.8 from engine no. LC1672 and 340 from engine no. 7J50001 (1963-69) ? Mk10 3.8 (1961-64) ? S-Type 3.4 and 3.8 (1963-68)
Timing pointer
is attached to the oil sump
More info...
Product number: 327662
E-Type 3.8 Series 1 (1961-64) ? Mark II (1959-69) ? S-Type 3.4 and 3.8 (1963-68) ? Mk10 3.8 (1961-64)
Oil thrower
crankshaft
More info...
Product number: 25957
XK120, XK140 and XK150 (1949-61) ? Mark I (1955-59) ? Mark II (1959-69) ? E-Type Series 1 and 2 (1961-70) ? Mark V 2.1/2 & 3.1/2 litre (1948-51) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? S-Type 3.4 and 3.8 (1963-68) ? 420 and Daimler Sovereign (1966-69) ? XJ6 Series I, 4.2 Series II to engine no. 8L22994 and 3.4 Series II to engine no. 8A3710 (1968-75) ? Daimler DS420 Limousine and Hearse (1968-75)
Crankshaft
with bearings - exchange. Identification: screwed plugs in crankshaft journals and crankshaft flange with 10 threads. This crank is sealed by an rope seal
More info...
Product number: 329426
3.4 and 3.8 XK engines: E-Type 3.8 Series 1 from engine no. R2564 (1962-64) ? Mark II: 3.4 from engine no. KH2794, 3.8 from engine no. LB8247 plus all 340 models (1962-69) ? S-Type 3.4 and 3.8 (1963-68) ? Mk10 3.8 (1961-64)
Crankshaft
new item without bearings. Identification: screwed plugs in crankshaft journals and crankshaft flange with 10 threads. This crank is converted to rear oil seal
More info...
Product number: 489580
3.4 and 3.8 XK engines: E-Type 3.8 Series 1 from engine no. R2564 (1962-64) ? Mark II: 3.4 from engine no. KH2794, 3.8 from engine no. LB8247 plus all 340 models (1962-69) ? S-Type 3.4 and 3.8 (1963-68) ? Mk10 3.8 (1961-64)
Big end bearing set
standard size - shaft diameter: 2.086"
More info...
Product number: 202710
All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)
Big end bearing set
+0.010" oversize - shaft diameter: 2.086"
More info...
Product number: 202816
All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)
Big end bearing set
+0.020" oversize - shaft diameter: 2.086"
More info...
Product number: 202817
All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)
Big end bearing set
+0.030" oversize - shaft diameter: 2.086"
More info...
Product number: 202802
All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)
Big end bearing set
+0.040" oversize - shaft diameter: 2.086"
More info...
Product number: 202803
All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)
Big end bearing set
+0.060" oversize - shaft diameter: 2.086"
More info...
Product number: 212266
All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)
Main bearing set
standard size - shaft diameter: 2.750"
More info...
Product number: 202706
2.4, 2.8, 3.4 and 3.8 XK engines (1949-73): XK120, XK140 and XK150 (1949-87) ? Mark I (1955-59) ? Mark II 3.4, 3.8, 240 and 340 (1959-69) ? Mk7, Mk8 and Mk9 (1950-61) ? C-Type (1951-53) ? D-Type (1954-57) ? XKSS (1957) ? S-Type (1963-68) ? Mk10 3.8 (1961-64) ? E-Type 3.8 Series 1 (1961-64) ? XJ6 2.8 Series I (1968-73)
Main bearing set
+0.010" oversize - shaft diameter of the standard bearing: 2.750"
More info...
Product number: 202822
2.4, 2.8, 3.4 and 3.8 XK engines (1949-73): XK120, XK140 and XK150 (1949-87) ? Mark I (1955-59) ? Mark II 3.4, 3.8, 240 and 340 (1959-69) ? Mk7, Mk8 and Mk9 (1950-61) ? C-Type (1951-53) ? D-Type (1954-57) ? XKSS (1957) ? S-Type (1963-68) ? Mk10 3.8 (1961-64) ? E-Type 3.8 Series 1 (1961-64) ? XJ6 2.8 Series I (1968-73)
Main bearing set
+0.020" oversize - shaft diameter of the standard bearing: 2.750"
More info...
Product number: 202823
2.4, 2.8, 3.4 and 3.8 XK engines (1949-73): XK120, XK140 and XK150 (1949-87) ? Mark I (1955-59) ? Mark II 3.4, 3.8, 240 and 340 (1959-69) ? Mk7, Mk8 and Mk9 (1950-61) ? C-Type (1951-53) ? D-Type (1954-57) ? XKSS (1957) ? S-Type (1963-68) ? Mk10 3.8 (1961-64) ? E-Type 3.8 Series 1 (1961-64) ? XJ6 2.8 Series I (1968-73)
Main bearing set
+0.030" oversize - shaft diameter of the standard bearing: 2.750"
More info...
Product number: 202797
2.4, 2.8, 3.4 and 3.8 XK engines (1949-73): XK120, XK140 and XK150 (1949-87) ? Mark I (1955-59) ? Mark II 3.4, 3.8, 240 and 340 (1959-69) ? Mk7, Mk8 and Mk9 (1950-61) ? C-Type (1951-53) ? D-Type (1954-57) ? XKSS (1957) ? S-Type (1963-68) ? Mk10 3.8 (1961-64) ? E-Type 3.8 Series 1 (1961-64) ? XJ6 2.8 Series I (1968-73)
Main bearing set
+0.040" oversize - shaft diameter of the standard bearing: 2.750"
More info...
Product number: 202798
2.4, 2.8, 3.4 and 3.8 XK engines (1949-73): XK120, XK140 and XK150 (1949-87) ? Mark I (1955-59) ? Mark II 3.4, 3.8, 240 and 340 (1959-69) ? Mk7, Mk8 and Mk9 (1950-61) ? C-Type (1951-53) ? D-Type (1954-57) ? XKSS (1957) ? S-Type (1963-68) ? Mk10 3.8 (1961-64) ? E-Type 3.8 Series 1 (1961-64) ? XJ6 2.8 Series I (1968-73)
Main bearing set
+0.050" - shaft diameter of the standard bearing: 2.750"
More info...
Product number: 394360
2.4, 2.8, 3.4 and 3.8 XK engines (1949-73): XK120, XK140 and XK150 (1949-87) ? Mark I (1955-59) ? Mark II 3.4, 3.8, 240 and 340 (1959-69) ? Mk7, Mk8 and Mk9 (1950-61) ? C-Type (1951-53) ? D-Type (1954-57) ? XKSS (1957) ? S-Type (1963-68) ? Mk10 3.8 (1961-64) ? E-Type 3.8 Series 1 (1961-64) ? XJ6 2.8 Series I (1968-73)
Main bearing set
+0.060" - shaft diameter of the standard bearing: 2.750"
More info...
Product number: 288535
2.4, 2.8, 3.4 and 3.8 XK engines (1949-73): XK120, XK140 and XK150 (1949-87) ? Mark I (1955-59) ? Mark II 3.4, 3.8, 240 and 340 (1959-69) ? Mk7, Mk8 and Mk9 (1950-61) ? C-Type (1951-53) ? D-Type (1954-57) ? XKSS (1957) ? S-Type (1963-68) ? Mk10 3.8 (1961-64) ? E-Type 3.8 Series 1 (1961-64) ? XJ6 2.8 Series I (1968-73)
Thrust washer set
standard size
More info...
Product number: 202787
XK120, XK140 and XK150 (1949-61) ? Mark I (1955-59) ? Mark II (1959-69) ? E-Type Series 1 and 2 (1961-70) ? Mk5 (1948-51) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-69) ? S-Type 3.4 and 3.8 (1963-68) ? 420 and Daimler Sovereign (1966-69) ? XJ6 Series I, II and III (1968-87) ? Daimler DS420 Limousine and Hearse (1968-92)