91黑料网

oil filter head - for return pipe to oil sump

?0.00

Product number: 537382

Details

Series 1 4.2 and Series 2 to engine no. 7R2297 (OTS/FHC) and to 7R35582 (2+2) (1964-69) ? Mk10 3.8 from engine no. ZA5083 and all 3.8 with ZB engine no. (1963-64) plus all Mk10 4.2 and 420G (1964-70)

Adaptor

?14.78

Product number: 537383

E-Type 3.8 Series 1 (1961-64) ? Mk10 3.8 to engine no. ZA5082 (1961-63)

standard size - shaft diameter: 2.086"

?149.00

Product number: 202710

All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)

+0.030" oversize - shaft diameter: 2.086"

?149.00

Product number: 202802

All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)

+0.040" oversize - shaft diameter: 2.086"

?149.00

Product number: 202803

All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)

+0.010" oversize - shaft diameter: 2.086"

?149.00

Product number: 202816

All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)

+0.020" oversize - shaft diameter: 2.086"

?149.00

Product number: 202817

All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)

+0.060" oversize - shaft diameter: 2.086"

oil drain and oil filler - 5/8" UNF, zinc

?200.00

Product number: 212266

All Jaguar fitted with XK engines (1949-87): XK120, XK140 and XK150 (1949-61) ? E-Type Series 1 and 2 (1961-70) ? Mark I 3.4 (1957-59) ? Mark II 3.4, 340 and 3.8 (1959-69) ? S-Type (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-70) ? XJ6 Series I, II and III (1968-87)

Blanking plug

?18.25

Product number: 218

XK120, XK140, XK150, Mark II, E-Type Series I, II, XJ6 Series I, II, III

Con rod bolt

aftermarket

?13.54

Product number: 25956

XK120, XK140 and XK150 (1949-61) ? Mark I (1955-59) ? Mark II (1959-69) ? E-Type Series 1 and 2 (1961-70) ? Mk5 (1948-51) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-69) ? S-Type 3.4 and 3.8 (1963-68) ? 420 and Daimler Sovereign (1966-69) ? XJ6 Series I, II and III (1968-87) ? Daimler DS420 Limousine and Hearse (1968-92)

Con rod bush

?6.88

Product number: 2239

XK120, XK140 and XK150 (1949-61) ? Mark I (1955-59) ? Mark II (1959-69) ? E-Type Series 1 and 2 (1961-70) ? Mk5 (1948-51) ? Mk7, Mk8 and Mk9 (1950-61) ? Mk10 (1961-66) ? 420G (1966-69) ? S-Type 3.4 and 3.8 (1963-68) ? 420 and Daimler Sovereign (1966-69) ? XJ6 Series I, II and III (1968-87) ? Daimler DS420 Limousine and Hearse (1968-92)

Conversion gasket set

less oil seal

?97.81

Product number: 203081

XK120, XK140 and XK150 (1949-61) ? Mk7, Mk8 and Mk9 (1950-1961) ? E-Type 3.8 Series 1 (1961-64) ? Mark I 3.4 (1957-59) ? Mark II (1959-69) ? S-Type 3.4 and 3.8 (1963-68) ? Mk 10 3.8 (1961-64)

Conversion gasket set

for spin on conversion. High qualitiy aftermarket produkt for use with genuine filter head but not suitable for using with an oil cooler. Required oil filter: 22928

?60.14

Product number: 203904

E-Type 4.2 to engine no. 7R1914 (OTS and FHC) and to 7R35388 (2+2) ? XJ6 4.2 to engine no. 7L1175 (1968) ? 420 and Daimler Sovereign (1966-69) ? Mk10 4.2 and 420G (1964-70)

kein Eintrag / ohne Bezeichnung
kein Eintrag
kein Eintrag
kein E

Conversion kit

?207.20

Product number: 550394

E-Type 4.2 Series 1, Series 2 to engine no. 7R2297 and 7R35582 (1964-69) ? Mark II 240 and 340 (1967-69) ? S-Type 3.4 and 3.8 (1963-68) ? 420 and Daimler Sovereign (1966-69) ? Mk10 and 420G (1961-70)

Kolbensatz
Piston set
Set de pistons
Zestaw t?oków
Zuiger set

+0.040" oversize. Specifications: 3.8 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.425"

?495.00

Product number: 323113

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

+0.030" oversize. Specifications: 3.8 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.425"

?495.00

Product number: 326832

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

standard size. Specifications: 3.8 engine with 3-ring pistons, and 8.0:1 compression ratio. Standard bore size: 3.425"

?579.82

Product number: 481312

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

+0.020" oversize. Specifications: 3.8 engine with 3-ring pistons, and 8.0:1 compression ratio. Standard bore size: 3.425"

?579.82

Product number: 481313

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

+0.030" oversize. Specifications: 3.8 engine with 3-ring pistons, and 8.0:1 compression ratio. Standard bore size: 3.425"

?579.82

Product number: 481314

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

+0.040" oversize. Specifications: 3.8 engine with 3-ring pistons, and 8.0:1 compression ratio. Standard bore size: 3.425"

?579.82

Product number: 481315

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

+0.020" oversize. Specifications: 3.8 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.425"

?495.00

Product number: 481316

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

standard size. Specifications: 3.8 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.425"

with bearings - exchange. Identification: screwed plugs in crankshaft journals and crankshaft flange with 10 threads. This crank is sealed by an rope seal

?495.00

Product number: 481317

E-Type 3.8 (1961-64) ? Mark II 3.8 (1959-67) ? XK150 (1957-61) ? S-Type 3.8 (1963-68) ? Mk10 3.8 (1961-64)

Crankshaft

new item without bearings. Identification: screwed plugs in crankshaft journals and crankshaft flange with 10 threads. This crank is converted to rear oil seal

?2,326.96

Product number: 329426

3.4 and 3.8 XK engines: E-Type 3.8 Series 1 from engine no. R2564 (1962-64) ? Mark II: 3.4 from engine no. KH2794, 3.8 from engine no. LB8247 plus all 340 models (1962-69) ? S-Type 3.4 and 3.8 (1963-68) ? Mk10 3.8 (1961-64)

Crankshaft