Cylinder head 4.2 litre
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Series 1 to Serie 2 to engine no. 7R1914 (OTS/FHC) and 7R35388 (2+2)
Benodigd: 1
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Series 2 from engine no. 7R1915 (OTS/FHC) and 7R35389 (2+2)
Benodigd: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Benodigd: 16
between rocker cover to cam bearing caps
Benodigd: 16
retaining cylinder head to front timing cover and cylinder block
Benodigd: 4
exhaust manifold, stainless steel
Series 1 to engine no. 7E6332
Benodigd: 13
exhaust manifold, stainless steel
Series 1 from engine no. 7E6333, all 2+2
Benodigd: 11
stainless steel
Series 1 to engine no. 7E6332
Benodigd: 13
stainless steel
Serise 1 from engine no. 7E6333, all 2+2
Benodigd: 5
7/16" - galvanised D-shaped washer for cylinder head dome nut
7/16" - galvanised 3.4 mm thick washer for cylinder head dome nut
engine. Steel replacement
Benodigd: 1
chromed. Securing rocker covers and cylinder head
Benodigd: 26
chromed. Securing rocker covers and cylinder head
Benodigd: 1
securing rocker cover
Series 2 from engine no. 7R2083 (OTS/FHC) and 7R35463 (2+2)
Benodigd: 2
gemaakt van chroomnikkel-magnesiumstaal met genitreerd oppervlak. Diameter: 41,3 mm
Benodigd: 1
set with one inner and one outer spring
Benodigd: 12
top, for inlet valve and exhaust valve - aftermarket
Benodigd: 12
inlet valve - bronze valve guide with 0.502" outside diameter and 1.866" length
Benodigd: 6
inlet valve +0.003" (1st oversize). Steel type
Benodigd: 6
inlet valve - bronze valve guide with 0.507" outside diameter and 1.866" length
Benodigd: 6
inlet valve, 2nd oversize with 12.85 mm outer diameter and 47.41 mm length. Steel type
Benodigd: 6
inlet valve - bronze valve guide with 0.504" outside diameter and 1.866" length
Benodigd: 6
inlet valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Benodigd: 6
inlet valve - bronze valve guide with 0.510" outside diameter and 1.866" length
Benodigd: 6
exhaust valve, 1st oversize with 12.83 mm outer diameter. Steel type
Benodigd: 6
exhaust valve - bronze valve guide with 0.506" outside diameter and 1.957" length
Benodigd: 6
exhaust valve, 2nd oversize with 12.88 mm outer diameter. Steel type
Benodigd: 6
exhaust valve - bronze valve guide with 0.507" outside diameter and 1.957" length
Benodigd: 6
exhaust valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Benodigd: 6
exhaust valve - bronze valve guide with 0.510" outside diameter and 1.957" length
Benodigd: 6
inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.88", ID = 1.38", H = 0.43"
Benodigd: 1
exhaust valve. Hardened version for lead free applications. Dimensions: OD = 1.689", ID = 1.317", H = 0.242"
Benodigd: 1
cam follower - diameter: 41.75 mm
Benodigd: 12
cam follower - diameter: 41.75 mm. Reproduction
Alternatives
Benodigd: 12
voor Jaguar XK6 motoren en V12 motoren (diameter 17,44 mm <> 0,6126 inch)
Benodigd: 1
Toerenteller - wordt bevestigd aan de inlaatnokkenas
Benodigd: 1
tachometer drive
Series 1 and 1.5 with engine no. 7E
Benodigd: 1
tachometer drive - nylon reproduction
Series 1 and 1.5 with engine no. 7E
Benodigd: 1
drive dog to tachometer drive adaptor
Series 1 and 1.5 with engine no. 7E
Benodigd: 1
internal star
Series 1 and 1.5 with engine no. 7E
Benodigd: 3
generator
Series 1 and 1.5 with engine no. 7E
Benodigd: 3
Series 1 and 1.5 with engine no. 7E
Benodigd: 1
inlet cam cover
Serie 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Benodigd: 2
Series 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Benodigd: 2
inlet cam shaft
Series 2 from engien no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Benodigd: 1
Series 2 from engine no.7R1001 (OTS/FHC) and 7R35001 (2+2)
Benodigd: 1
Benodigd: 1
Benodigd: 1
LH - aluminium
Series I from engine no. 7E2896
Benodigd: 1
Series 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Benodigd: 1
oil filler cap
Series 1to engine no. 7E2895 (OTS/FHC)
Benodigd: 1
oil filler cap
Series 1 from engine no. 7E2896 (OTS/FHC), all 2+2
Benodigd: 1
engine breather, 90° angled
Series 1 and 1.5 with engine no. 7E
Benodigd: 1
engine breather - 78 cm long
Series 1 and 1.5 with engine no. 7E
Benodigd: 1
engine breather - 78 cm long
Series 2 from 7R1001 (OTS/FHC) and 7R35001 (2+2)
Benodigd: 2
made from high quality Cometic CFM material. Bore size: 3.660", built in thickness: 0.59"
4.2 to October 1968: OTS and FHC models to engine no. 7R1914 plus 2+2 models to 7R35388
Benodigd: 1
made from high quality composite material. Bore size: 93.50 mm + 0.5 mm, thickness: 0.64", built in thickness: 0.61"
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Benodigd: 1
made from high quality Cometic CFM material. Bore size: 3.660", built in thickness: 0.59"
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Benodigd: 1
competition MLS construction for high compression engines. Max bore size: 3.660", built in thickness: 0.051"
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Benodigd: 1
Benodigd: 1
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388 (October 1968)
Benodigd: 1
dipstick
4.2 Series 1 plus 4.2 Series 2 to engine no. 7R2082 (OTS and FHC) and 7R38580 (2+2)
Benodigd: 1
dipstick - reproduction in stainless steel
4.2 Series 1 plus 4.2 Series 2 to engine no. 7R2082 (OTS and FHC) and 7R38580 (2+2)
Benodigd: 1
90° angled - plastic reproduction with Champion lettering
Benodigd: 1
made in red vulcanised fibreboard with the correct rivets and brackets
Benodigd: 6
256° 'Road' specification - new items, supplied in pairs. Feature: Mounting with 2 and 4 bolts possible
Specification: 4 bolt fixing
Benodigd: 1
inlet - XJ6 version, can be fixed with 2 and 4 bolts
Benodigd: 1
exhaust - XJ6 version, can be fixed with 2 and 4 bolts
Benodigd: 1
inlet and exhaust manifold, 34 studs
short studs only
Benodigd: 1
on cylinder head
4.2 Series 1 OTS to 1E1252 and 1E11048, FHC to 1E20691 and 1E31077 (1961-65). Except USA and Canada models
Benodigd: 1
on cylinder head
4.2 Series 1 OTS from 1E1253 and 1E11049, FHC from 1E20692 and 1E31078 (1965) and all USA and Canada exported vehicles
Benodigd: 1
gemaakt van gepolijst aluminium
Benodigd: 1
