Blocco motore 998 ccm e Cooper 998 ccm A Serie
oil pressure operating valve
Richiesto: 1
for higher oil pressure
use together with spring 9240
Richiesto: 1
for higher oil pressure
use together with ball 327229
Richiesto: 1
operating valve
Richiesto: 1
oil gallery. Diameter: 1/2", total height: 3/8"
alternatives
Richiesto: 2
camshaft oil feed
Richiesto: 1
at cylinder block
if fitted
Richiesto: 1
for water drain tap - 3/32" thick
alternatives
Richiesto: 1
for water drain tap - 1/16" thick
alternatives
Richiesto: 1
alternative to water drain tap 5411
Richiesto: 1
for blanking plug 204219
Richiesto: 1
oil gallery
if fitted
Richiesto: 1
for blanking plug 292851
if fitted
Richiesto: 1
with breather pipe
early models
could be replaced by side cover 8253
Richiesto: 1
with oil separator and breather
Richiesto: 1
side cover - 1/8" thick
to approx. 1966
Richiesto: 2
side cover - 1/4" thick
from approx. 1966
Richiesto: 2
oil pipe
only on cars without if oil pressure switch 14956
Richiesto: 1
for union 12644
if fitted
Richiesto: 1
if tube 8294 is fitted
Richiesto: 1
dipstick - nylon
use together with dipstick 306404
Richiesto: 1
use together with dipstick tube 327237
Richiesto: 1
dipstick - metal
use together with dipstick 306704
Richiesto: 1
filter to block, use with oil filter element
use bolt 6511 if not available
Richiesto: 2
filter to block, use with oil filter element
replaces stud 298337
Richiesto: 2
filter to block, use with spin-on filter
Richiesto: 2
cylinder head - short
5 if stud 306181 to hold coil bracket is not fitted
Richiesto: 4
cylinder head - medium
if coil bracket fitted to cylinder head
Richiesto: 1
improved
fitted without washer 212195
Richiesto: 9
use if no mechanical fuel pump is fitted
Richiesto: 1
main bearing cap
Richiesto: 6
engine number
blank
Richiesto: 1
and shaft - distributor
Richiesto: 1
distributor drive, variant with groove for 'O' ring
Richiesto: 1
distributor drive housing
Richiesto: 1
upto engine no. 99H/791
engines without timing chain tensioner
Richiesto: 1
from engine no. 99H/791 on
engines with timing chain tensioner
Richiesto: 1
non indurente, per testate e giunzioni
Contenuto: 80 ml (125,12 ? / 1000 ml)
BMC green
Contenuto: 400 ml (42,50 ? / 1000 ml)
matt black
Contenuto: 400 ml (30,00 ? / 1000 ml)
