Testa cilindri - Motore con 3 cuscinetti
with breather pipe
18G engines
Alloy rocker covers
Richiesto: 1
no breather pipe
18GA engines
Alloy rocker covers
Richiesto: 1
made from cork
Richiesto: 1
on rocker cover 'MG'
Alternatives
Richiesto: 1
on rocker cover - 'MG'
Alternatives
Richiesto: 1
on rocker cover 'patents'
Alternatives
Richiesto: 1
on rocker cover - 'patents'
Alternatives
Richiesto: 1
plastic, non vented
18G engine
Richiesto: 1
for oil filler cap
18G engine
Richiesto: 1
black plastic, with breather
18GA engine
Richiesto: 1
red plastic, vented
18GA engine
Richiesto: 1
chromed - length: 7/8"
Richiesto: 2
chromed - length: 1.1/4"
Richiesto: 2
Not suitable for alloy rocker covers
Richiesto: 2
Richiesto: 2
screwed - in rocker shaft
Richiesto: 1
plain - in rocker shaft
Richiesto: 1
without oil feed hole
Richiesto: 3
with centre tapped hole
Richiesto: 1
for rocker shaft adjusting screw
Richiesto: 1
rocker arm - 5/16" UNF
Richiesto: 8
rocker arm adjusting screw - 5/16" UNF
Richiesto: 8
rocker arm
Richiesto: 8
rocker arm. Must be reamed and drilled for oil holes
Richiesto: 8
exchange. Identification: Double valve springs
Richiesto: 1
new item. Assembled head with valves, single valve springs, valve guides and valve seat inserts. Variant with in-line oil feed
Richiesto: 1
new item. Assembled head with valves, double valve springs, valve guides and valve seat inserts. Variant with in-line oil feed
Richiesto: 1
for temperature sensor
Richiesto: 1
heater valve
When heater not fitted
Richiesto: 1
manifold to cylinder head - 1.7/8"
Richiesto: 4
manifold to cylinder head - 1.5/8" long
18GB to 18GG and 18GK engines (to October 1971)
Richiesto: 2
classic soft material gasket on metal layer with 1.5 mm thickness
Richiesto: 1
classic copper gasket on metal layer with 1 mm thickness
Richiesto: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed and 1.2 mm thickness. Please note: do not re-torque cylinder head when using this gasket
Characteristic: do not re-torque cylinder head when using this gasket
Richiesto: 1
made from 214N stainless steel. Head diameter: 1.35"
Richiesto: 4
inlet valve. Bronze type for lead free applications
Richiesto: 4
exhaust valve. Bronze type for lead free applications
Richiesto: 4
for exhaust valve. Hardened variant for lead free applications - dimensions: 1.505 x 1.183 x 0.250"
Richiesto: 4
with outer groove - supplied in pairs
Richiesto: 8
improved version - may replace OE valve stem seal
Replaces valve stem seal
Richiesto: 8
supplied in sets of 16 double springs
Richiesto: 1
non indurente, per testate e giunzioni
Richiesto: 1
Contenuto: 80 ml (125,12 ? / 1000 ml)
with soft material head gasket on metal layer
Richiesto: 1
con guarnizione della testata del cilindro in rame su supporto metallico
Richiesto: 1
with soft material head gasket on metal layer
Do not re-torque cylinder head when using this gasket set
Richiesto: 1
with modern composite cylinder head gasket with 83.00 mm + 0.5 mm max. bore size
Richiesto: 1
