Cylinder head - 2.5 TD
new head with valves and valve springs
Richiesto: 1
engine breather
To engine number 19J15451C
Richiesto: 1
engine breather
From engine number 19J15452C
Richiesto: 1
with connection for engine breather hose
To engine number 19J15451C
Richiesto: 1
with connection for engine breather hose
From engine number 19J15452C
Richiesto: 1
engine breather
Defender 2.5 Td with standard air intake (no snorkel) from engine number 19J00001C to 19J15451C (1986)
Richiesto: 1
breather
Vehicles with raised air intake (snorkel) to engine number 19J15451C
Richiesto: 1
To engine number 19J15451C
Richiesto: 1
From engine number 19J15452C
Richiesto: 1
made from cork, adhesive
Richiesto: 1
for injector bore
Richiesto: 4
with 6.9 cm total length
Richiesto: 2
with 11.6 cm total length
Richiesto: 9
with 15.2 cm total length
Richiesto: 5
water temperature - on inlet manifold, water pump housing, thermostat housing or water rail
To engine number 19J25183C
Richiesto: 1
water temperature
From engine number 19J25184C
Richiesto: 1
temperature transmitter - feature: M24x1.0 external thread
Richiesto: 1
temperature sensor adaptor to cylinder head
Richiesto: 1
engine block
To engine number 19J25183C
Richiesto: 1
cylinder block
From engine number 19J25184C
Richiesto: 1
engine block
To engine number 19J25183C
Richiesto: 1
cylinder block
From engine number 19J25184C
Richiesto: 1
cylinder head
To engine number 19J25183C
Richiesto: 1
cylinder head
From engine number 19J25184C
Richiesto: 2
oil pipe to cylinder haead and to engine block- feature: M10x1.5 standard thread
Richiesto: 2
between cylinder head and cylinder block
Richiesto: 1
cylinder head - total length: 3.3/16"
Richiesto: 4
cylinder head - total length: 3.3/16"
Richiesto: 2
inlet valve
To engine number 19J25183C
Richiesto: 4
inlet valve
From engine number 19J25184C
Richiesto: 4
exhaust valve
To engine number 19J25183C
Richiesto: 4
exhaust valve
From engine number 19J25184C
Richiesto: 4
classic soft material gasket on metal layer
Richiesto: 1
- front position
Richiesto: 1
retaining rocker shaft
Richiesto: 1
for inlet rocker arm (RH cranked)
Richiesto: 4
for exhaust rocker arm (LH cranked)
Richiesto: 4
inlet and exhaust valve - may replace the genuine fitted double spring
Richiesto: 8
Can be fitted if suffering from excessive valve stem or valve rocker wear
Richiesto: 8
complete unit with slide rail, roller, bolt and washer
Richiesto: 8
