Cylinder head Cooper S 970 cc, 1070 cc & 1275 cc
without breather
from conversions, looks like new
Benodigd: 1
for 11 bolt cylinder head
Indentification: small grooves for head bolt 10 + 11 on left and right side
Benodigd: 1
Benodigd: 2
chromed - length: 7/8"
alternatives
Benodigd: 2
genuine type with 14,28 mm diameter
alternatives
Benodigd: 1
reproduction with 14,28 mm diameter
alternatives
Benodigd: 1
oversize + 0.005"
alternatives
Benodigd: 1
with threat for rocker shaft adjusting screw
Benodigd: 1
for adjusting screw
could be used alternative for 8612
Benodigd: 1
without threat for rocker shaft adjusting screw
Benodigd: 3
in rocker arm
Benodigd: 8
rocker arm - 5/16" UNF
for rocker arm 203122
Benodigd: 8
rocker arm adjusting srew, 5/16" UNF
for rocker arm 203122
Benodigd: 8
rocker arm - 1/4" UNF
alternative, if threat smaller than 5/16"
Benodigd: 8
rocker arm adjusting screw - 1/4" UNF
alternative, if threat smaller than 5/16"
Benodigd: 8
rocker arm outlet to rocker pedestal
Benodigd: 6
steel, Inlet and exhaust valve, tappered nose
Benodigd: 8
bronze, inlet and exhaust valve, tappered nose
Benodigd: 8
diameter: 35,6 mm length: 89,5 mm
970cc 1964-66, 1071 cc 1963-64, 1275 cc 1964-67, cylinder head with casting: AEG163
Indentification: smal collet groove
Benodigd: 4
diameter: 30,97 mm length: 89,6 mm
970cc 1964-66, 1071 cc 1963-64, 1275 cc 1964-67, cylinder head with casting: AEG163
Indentification: smal collet groove
Benodigd: 4
diameter: 35,6 mm length: 90,9 mm
1275 cc 1968-71 Mk3, cylinder head with casting: 12G940
Indentification: small collet groove
Benodigd: 4
diameter: 29,44 mm length: 90,8 mm
1275 cc 1968-71 Mk3, cylinder head with casting: 12G940
Indentification: small collet groove
Benodigd: 4
standard
Cooper S Mk3 inlets only
Benodigd: 8
uprated
Cooper S Mk3 inlets only
Benodigd: 8
top
for valves with small collet groove
Benodigd: 8
for valves with small collet groove
Benodigd: 16
inlet valve, semi finished
Benodigd: 4
for water hole
Benodigd: 3
oil gallery. Diameter: 1/2", total height: 3/8"
Benodigd: 1
Koppakking in koperuitvoering
Benodigd: 1
metaal uitvoering, beschermlaag
Benodigd: 1
metalen uitvoering, beschermlaag, gevulcaniseerde oliekanalen
Benodigd: 1
only used if no heating tap is mounted
Benodigd: 1
universele afdichtkit
Inhoud: 80 ml (? 125,12 / 1000 ml)
Standaard uitvoering
Benodigd: 1
met cylinderkoppakking in koperuitvoering
Benodigd: 1
