Crankshaft 1275 cc Cooper S MK3 A series
krukas - 4-delige set in standaard maat
Benodigd: 1
krukas - 4-delige set met +0,003" overmaat
Benodigd: 1
krukas - 4-delige set met +0,005" overmaat
Benodigd: 1
krukas - 4-delige set met +0,030" overmaat
Benodigd: 1
identity by 5.75" centres length - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
Benodigd: 4
high grade 8470 chrome moly with a tensile strength of 220.000 psi ensure substantial strength and reduce stretching - supplied in sets of 8 with nuts
alternative for bolt 5840
Benodigd: 8
self locking - high tensile grade: S
Benodigd: 8
uprated torx version
alternative for conrod nut 5830
Benodigd: 8
standard size - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.010" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.020" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.030" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.040" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
for primary gear - mounted on engine side
Benodigd: 1
for primary gear - mounted on flywheel side
Benodigd: 1
primary gear to 'C' type clip
Benodigd: 1
for oil pump with star drive
Benodigd: 1
Benodigd: 1
standard, cast iron
more gear kits
Benodigd: 1
with oilseparator
Benodigd: 1
Standaard maat Eigenschappen: zuigerveer = 1,5mm, olieschraperveer = 3,0mm , 9,75:1 compressie
Benodigd: 4
+ 0.020", 3 rings
CR 9.7:1
dished
Benodigd: 4
+ 0.030", 3 rings
CR 9.7:1
dished
Benodigd: 4
+ 0,040", 3 rings
CR 9.7:1
dished
Benodigd: 4
+ 0.060", 3 rings
CR 9.7:1
dished
Benodigd: 4
Standaard maat Eigenschappen: zuigerveer = 1,5mm, olieschraperveer = 3,0mm , 9,75:1 compressie
Benodigd: 1
+0.020" overmaat Eigenschappen: 3 zuigerring type, zuigerveer = 1,5mm, olieschraperveer = 3,0mm , 9,75:1 compressie
Benodigd: 1
+0.030" overmaat Eigenschappen: 3 zuigerring type, zuigerveer = 1,5mm, olieschraperveer = 3,0mm , 9,75:1 compressie
Benodigd: 1
+0.040" overmaat Eigenschappen: 3 zuigerring type, zuigerveer = 1,5mm, olieschraperveer = 3,0mm , 9,75:1 compressie
Benodigd: 1
+0.060" overmaat Eigenschappen: 3 zuigerring type, zuigerveer = 1,5mm, olieschraperveer = 3,0mm , 9,75:1 compressie
Benodigd: 1
standard, for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Benodigd: 1
+ 0.020", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Benodigd: 1
+ 0.040", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Benodigd: 1
+ 0.060", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Benodigd: 1
distributor drive, variant with groove for 'O' ring
Benodigd: 1
crankshaft - made from steel
use with damper 337476
Benodigd: 1
