Crankshaft 1098 cc A series
with casting 12G82 - reconditioned, in exchange
Benodigd: 1
+ 0.010"
Benodigd: 1
+ 0.030"
Benodigd: 1
for 2nd and 4th cylinder - identified by floating gudgeon pin
Benodigd: 2
for 1st and 3rd cylinder - identified by floating gudgeon pin
Benodigd: 2
standard size - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.010" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.020" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.030" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
+0.040" oversize - heavy duty steel-backed cast copper lead Tri-metal bearings. Shaft diameter of the standard crankshaft: 1.625". Upper and lower half with groove and oil hole
Benodigd: 1
engine side - for primary gear 215876
Benodigd: 1
for primary gear - mounted on flywheel side
Benodigd: 1
primary gear to 'C' type clip
Benodigd: 1
0.118" - 0.120"
quantity as required
front
engines without pad type tensioner
Benodigd: 1
engine plate
engines without pad type tensioner
Benodigd: 1
engine plate to main bearing cap
engines without pad type tensioner
Benodigd: 2
engines without pad type tensioner
Benodigd: 2
3/4" x 5/16" UNF
engines without pad type tensioner
Benodigd: 2
engines without pad type tensioner
Benodigd: 2
engines without pad type tensioner
Benodigd: 1
timing cover
engines without pad type tensioner
Benodigd: 1
front - for engines with pad type tensioner
Benodigd: 1
engine front plate
engines with pad type tensioner
Benodigd: 1
engine plate to main bearing cap
engines with pad type tensioner
Benodigd: 2
engines with pad type tensioner
Benodigd: 2
3/4" x 5/16" UNF
engines with pad type tensioner
Benodigd: 2
timing chain tensioner
engines with pad type tensioner
Benodigd: 1
for tensioner pad
engines with pad type tensioner
Benodigd: 1
3/4" x 5/16" UNF
engines with pad type tensioner
Benodigd: 1
for tensioner mounting
engines with pad type tensioner
Benodigd: 1
for tensioner mounting
engines with pad type tensioner
Benodigd: 1
engines with pad type tensioner
Benodigd: 1
timing cover
engines with pad type tensioner
Benodigd: 1
uprated single row endless chain with 52 pitches
Benodigd: 1
Benodigd: 4
Benodigd: 4
standard, for 4 ring piston
compression rings = 0.0625", oil ring = 0.125"
Benodigd: 1
+ 0.020", for 4 ring piston
compression rings = 0.0625", oil ring = 0.125"
Benodigd: 1
+ 0.030", for 4 ring piston
compression rings = 0.0625", oil ring = 0.125"
Benodigd: 1
+ 0.040", for 4 ring piston
compression rings = 0.0625", oil ring = 0.125"
Benodigd: 1
+ 0.060", for 4 ring piston
compression rings = 0.0625", oil ring = 0.125"
Benodigd: 1
standard, 4 rings
Benodigd: 4
standard, for 4 ring piston
compression rings = 0.0625", oil ring = 0.1575"
Benodigd: 1
+ 0.020", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1575"
Benodigd: 1
+ 0.030", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1575"
Benodigd: 1
+ 0.040", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1575"
Benodigd: 1
+ 0.060", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1575"
Benodigd: 1
distributor drive, variant with groove for 'O' ring
Benodigd: 1
crankshaft
engine 10H/791AA/101 to 50677
Benodigd: 1
crankshaft
engine 10H/791AA/50678 on
Benodigd: 1
recommended for fitting camshafts and auxiliary shafts
Inhoud: 250 ml (? 60,16 / 1000 ml)
