91黑料网

programmeerbaar via USB Interface - voor Rover V8-motoren met Lucas distributeur, min aan de massa en elektrische toerenteller. Houd er rekening mee dat het originele verdeelwiel opnieuw moet worden gemonteerd

new - 35D8 type

Defender V8 models with Zenith-Stromberg carburettors and engine number 19G

exchange - 35D8 type

Defender V8 with Zenith-Stromberg carburettors and engine number 19G

new - 35D8 type

Defender V8 with Stromberg carburettor with engine number 14G, 15G and 17G

new - 35DM8 type

Defender V8 with Stromberg carburettor with engine number 20G

new - 35DM8 type

Defender V8 with Stromberg carburettor with engine number 21G and 22G

35DLM8 distributor with 2 pin connector for the ignition module - reconditioned, in exchange. May replaced by distributor 370496 plus link lead 465090

90" Defender 3.5 V8 with SU carburettors to engine number 20G01607A and 24G0035A

reproduction of the electronic Lucas 35DLM8 distributor with 3 pin connector for the ignition module

90" Defender 3.5 V8 with SU carburettors from engine no. 20G01608A and 24G0036A

reproduction of the electronic Lucas 35DLM8 distributor with 3 pin connector for the ignition module

110" and 130" Defender 3.5 V8 with SU carburettors (1986-93)

clamping plate

retaining distributor

for Lucas 35D8 distriburor

Defender V8 with Zenith-Stromberg carburettors and engine number 14G

for Lucas 35D8 distriburor

Defender V8 with Zenith-Stromberg carburettors and engine number 17G and 22G

for Lucas 35D8 distriburor

Land Rover: Defender V8 with Zenith-Stromberg carburettors and engine number 15G, 19G and 21G

for Lucas 35D8 distriburor

Defender V8 models with Zenith-Stromberg carburettors and engine number 20G and SU carburettors to engine number 20G01607A und 24G00235A

for Lucas 35D8 distributor

Defender V8 with SU carburettors from engine number 20G01608A und 24G00236A

Lucas 35D8 distributor - characteristic: inner grading (after 13 mm depth the inner diameter is reduced from 14.2 mm to 10.5 mm), dimensions: total length: 70.8 mm, total height: 25 mm

Defender V8 with Stromberg carburettor with engine number 14G, 15G and 17G

between ignition coil and Lucas 35D8 distributor

Defender 3.5 V8 with Stromberg carburettors and engine number 14G, 15G and 17G

for Lucas 35D8 distributor

Defender V8 with Stromberg carburettor with engine number 14G, 15G and 17G

for Lucas 35D8 distributor

Defender V8 with Stromberg carburettor with engine number 14G, 15G and 17G

to distributor

for Lucas 35D8 distriburor

drive gear distributor

for Lucas 35DE8 distributor - characteristic: no inner grading (the end-to-end inner diameter is 14.2 mm), dimensions: total length: 70.8 mm, total height: 23.5 mm

Defender V8 with Zenith-Stromberg carburettors and engine number 19G, 20G, 21G, 22G and SU carburettors

between distributor and distributor cap

Defender V8 with Zenith-Stromberg carburettors and engine number 19G, 20G, 21G, 22G and SU carburettors

with 2 pin connector for electronic Lucas 35D8 distributor

Defender V8 to engine number 20G01607A and 24G00235A

with 3 pin connector for electronic Lucas 35D8 distributor

Defender V8 from engine number 20G01608A and 24G00236A

amplifier to coil

Defender V8 from engine number 20G01608A and 24G00236A

with 3 pin connector

Defender V8 from engine number 20G01608A and 24G00236A

to distributor

drive gear distributor

for Lucas 35D8 distriburor