Cylinder head 1275 cc A-plus series MPi 1997 on
without breather - green, with chromed filler cap, fitting material & gasket
Required: 1
from conversions, looks like new
Required: 1
chromed, with oil filler cap
Required: 1
black plastic, with breather
Required: 1
Required: 2
chromed - length: 7/8"
alternatives
Required: 2
on rocker cover - 'Mini Cooper'
Cooper cars
Required: 1
genuine type with 14,28 mm diameter
alternatives
Required: 1
reproduction with 14,28 mm diameter
alternatives
Required: 1
oversize + 0.005"
alternatives
Required: 1
with threat for rocker shaft adjusting screw
Required: 1
without threat for rocker shaft adjusting screw
Required: 3
rocker arm adjusting screw - 5/16" UNF
Required: 8
with 33.2 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
with 35.7 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
with 29.4 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
Material: Viton
series on 1,3 MPI (11/1996-2000), fits also all other Mini models
Required: 8
top
for valves with triple collet groove
Required: 8
for valves with triple collet groove
Required: 16
inlet valve, semi finished
Required: 4
exhaust valve
for unleaded fuel
Required: 4
oil gallery. Diameter: 1/2", total height: 3/8"
Required: 1
for water hole
Required: 3
thermostat housing - uprated, made from high quality 1.5 mm gasket material, extremepressure resistant to 750 psi
alternative
Required: 2
CNC made alloy billet reproduction. The original tooling is no longer available
Required: 1
shouldered, 5/16" UNC, 7/16" AF spannersize
Required: 3
large port specification
if LCB-Manifold fitted or bigger ports
Required: 1
for inlet-/ outletmanifold, inner fitting
Required: 2
for inlet-/ outletmanifold, inner fitting
Required: 4
standard type
alternatives
Required: 1
classic copper gasket on metal layer for engines up to 1340 cc
alternatives
Required: 1
classic soft material gasket on metal layer
Required: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed
alternatives
Required: 1
alternative for spark plug 14678
Required: 4
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (?125.12 / 1000 ml)
with Payen classic soft material head gasket on metal layer with special sealing ring for the oil feed
Required: 1
