crank case ventilation carburettor cars
crank case breather - 14 cm long hose between rocker cover and air filter case
early cars, if rocker cover with vent
Required: 1
crank case ventilation, rocker cover to air filter case
early cars, if rocker cover with vent
if connector 1/2" diameter
Required: 1
early cars, if rocker cover with vent
Required: 2
crank case ventilation, oil separator and manifold union to valve
if crank case breather regulated by valve
supplied in metres, cut to length requiered
Required: 1
Hose to oilseparator tappet chest, valve and manifold union
if crank case breather regulated by valve
Required: 4
engine breathing
if crank case breather regulated by valve
Required: 1
inside crank case breathing control valve
if crank case breather regulated by valve
part of control valve 214736
Required: 1
control valve
if crank case breather regulated by valve
part of control valve 214736
Required: 1
engine breathing control valve
if crank case breather regulated by valve
part of control valve 214736
Required: 1
control valve
if crank case breather regulated by valve
part of control valve 214736
Required: 1
control valve
if crank case breather regulated by valve
part of control valve 214736
Required: 1
control valve to inlet manifold
if crank case breather regulated by valve
Required: 1
adaptor to inlet manifold
if crank case breather regulated by valve
Required: 1
control valve
if crank case breather regulated by valve
Required: 1
bracket to inlet manifold
if crank case breather regulated by valve
Required: 1
for screw bracket to inlet manifold
if crank case breather regulated by valve
Required: 1
bracket to control valve
if crank case breather regulated by valve
Required: 1
for screw bracket to control valve
if crank case breather regulated by valve
Required: 1
for screw bracket to control valve
if crank case breather regulated by valve
Required: 1
crankcase ventilation, oilseparator tappet chest to carburettor
848 - 1098 cc
Required: 1
large, hose to oilseparator tappet chest
848 - 1098 cc
Required: 1
small, hose to carburettor
848 - 1098 cc
Required: 1
crankcase ventilation, oilseparator time cover to Y-piece
1275 cc
Required: 1
crankcase ventilation, carburettor to Y-piece
1275 cc
Required: 1
crankcase ventilation, oilseparator clutch housing to Y-piece
1275 cc
Required: 1
small, hose to carburettor and Y-piece
1275 cc
Required: 3
large, hose to oilseparator and Y-piece
1275 cc
Required: 3
crank case ventilation, on clutch housing
1275 cc
Required: 1
crank case ventilation, on clutch housing
1275 cc, 1990 on, with brake servo
Required: 1
Crank case breathing, on clutch housing - stainless steel, polished
1275 cc, 1990 on, with brake servo
Required: 1
oilseparator to clutch housing
1275 cc
Required: 1
fitting oilseparator to clutch housing
1275 cc
Required: 1
fitting oilseparator to clutch housing
1275 cc
Required: 2
fitting oilseparator to clutch housing
1275 cc
Required: 1
fitted under LH wheelarch
1275 cc, 1990 on
also 998 cc if workscatalyst equipped
Required: 1
carbon cannister
1275 cc, 1990 on
also 998 cc if workscatalyst equipped
Required: 1
1275 cc
also 998 cc if workscatalyst equipped
in thermostat housing, directs purge valve on carbon canister
1275 cc, 1990 on
also 998 cc if workscatalyst equipped
Required: 1
for thermo-vacuum switch
1275 cc. 1990 on
also 998 cc
Required: 1
T-shape, for hoses carbon cannister to crank case ventilation
1275 cc, 1990 on
also 998 cc if workscatalyst equipped
Required: 1
