Windscreen wiper - MK3 approx. 1970 on
reproduction of the Lucas 14W type. This 12 volt, two speed motor with round bodycomes but without drive gear
Required: 1
14W type - without drive gear. Characteristique: 12 volt, two speed and round body
Required: 1
14W type - less drive gear. Characteristic: 12 volts, two speed and round body - reconditioned, in exchange
Required: 1
Required: 1
120° , 46 teeth
Van and Pick-up only
Required: 1
parking, clip on type, 5 spade connectors
Required: 1
with 5 female spade connectors, for two speed wiper motor
Required: 1
with 5 cables, for two speed wiper motor
Required: 1
with rubber - wiper motor to bulkhead
upto 1989
Required: 1
with rubber, stainless steel - wiper motor to bulkhead
upto 1989
Required: 1
retaining fixing strap wiper motor to bulkhead
upto 1989
Required: 2
with panhead - retaining fixing strap wiper motor to bulkhead
upto 1989
Required: 2
retaining fixing strap wiper motor to bulkhead
upto 1989
Required: 2
1/4" UNF - retaining fixing strap wiper motor to bulkhead
Van and Pick-up only
Required: 2
below wiper motor
1989 on, if brake servo is fitted
Required: 1
to bracket brake servo
1989 on, if brake servo is fitted
Required: 1
stainless steel, length: 10" - for flat and curved screens. Feature: centre hinge for wiper arm with 5.2 mm bayonet fitting
Required: 2
5.2 mms bajonet fitting, length: 10" - polished stainless steel
Required: 2
5.2 mms bajonet fitting, length: 10" - black
Required: 2
5.2 mms bajonet fitting, length: 11" - black
Required: 2
for hook fitting - black - genuine Rover
approx. 1990 on
Required: 2
supplied with 2 plastik adapters for bajonet or hook fitting, length: 11" - black
from 1990 onwards with 7 mm hook fitting
Required: 2
stainless steel - wiper blade fitting with 5.2 mms bajonet
LHD
right hand park
Required: 2
stainless steel - wiper blade fitting with 5.2 mms bajonet
RHD and Innocenti
left hand park
Required: 2
black - wiper blade fitting with 5.2 mms bajonet
LHD
right hand park
Required: 2
black - wiper blade fitting with 5.2 mms bajonet
RHD and Innocenti
left hand park
Required: 2
wiper blade fitting with hook - black
LHD approx. 1990 on
right hand park
Required: 2
wiper blade fitting with hook - black
RHD approx. 1990 on
left hand park
Required: 2
and wiper blades - stainless steel
LHD
right hand park - complete kit, also to convert cars 1990 on
Required: 1
and wiper blades - stainless steel
RHD
left hand park - complete kit, also to convert cars 1990 on
Required: 1
with 32 teeth - characteristic: retaining with eight sided nut
Required: 2
length: 60"
cut to requiered length
Required: 1
with nut - wiper rack. Length: 38" - cut and flare to required lengths
Required: 1
