91黑料网

Metal variant with 2 adjusters

Plastic variant with 2 adjusters

alternative for metal type 4588

plastic - variant for vehicles with self levelling headlamps

from VIN...BD064959 (from mid 1993 on)

for 7" headlamp bowl with 2 adjusting screws

Headlamp bowl, Load Levelling Type

mid 1993 (VIN) ..BD064959 on

retaining headlamp bowl to wing

retaining headlamp bowl to wing

alternative for pop rivet 305959

retaining headlamp bowl to wing

alternative for pop rivet 305959

2 screw type

for 7" headlamp without pilot. Metal variant for bowl with 2 adjusters

for 7" headlamp. Plastic variant for bowl with 2 adjusters

alternative for metal type 5021

for 7" headlamp. Variant for metal headlamp bowl with 2 adjusters

not models plastic headlamp bowl or with leveling headlamps

for 7" headlamps - chromed

models with plastic headlamp bowls or with leveling headlamps

retaining ring to inner bowl

with 7" diameter, made from plastic. Complete with inner rim, rubber seal and adjuster kit

alternative for loose parts

plastic - variant for vehicles with self levelling headlamps

from VIN...BD064959 (from mid 1993 on)

for headlamp leveling

from VIN...BD064959 (from mid 1993 on)

with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to LHD models with pilot

LHD

with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to LHD models with pilot

LHD

with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to LHD models with pilot and sold as a pair

LHD

with clear lens and built-in 65/55 watt bulb, RHD, no pilot - 7" diameter

RHD

UK only

with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to RHD models with pilot and sold as a pair

RHD

with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to LHD models without pilot

LHD, Clubman & Moke with separate side light

with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to LHD models without pilot

LHD, Clubman & Moke with separate side light

with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to RHD models without pilot

RHD, Clubman & Moke with separate side light

reproduction with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to LHD models with pilot

Innocenti Mini Cooper (1972-75)

levelling type for LHD models. Complete assembly with bowl, levelling motor, retaining ring, gasket and long wire with single connectors

from mid 1993 to November 1996: 1.3 Spi from VIN...BD064959 to BD134454

levelling type for LHD models. Complete assembly with headlamp bowl, motor, retaining ring, gasket and short wire with compact plug

1.3 Mpi from November 1996 (from VIN...BD134455)

levelling type for RHD models. Complete assembly with headlamp bowl, motor, retaining ring, gasket and short wire with compact plug

1.3 Mpi from November 1996 (from VIN...BD134455)

plastic - variant for vehicles with self levelling headlamps

from VIN...BD064959 (from mid 1993 on)

for headlamp levelling

from VIN...BD064959 (from mid 1993 on)

12 volt, 45/40 watt, unified European P45t base, clear bulb surface

12 volt, 45/40 watt, unified European P45t base, yellow bulb surface

France only

12 volt, 60/55 watt, unified European P45t base, clear bulb surface

conversion to use halogen in bilux socket

12 volt, 5 watt, BA9s bajonett base, clear bulb surface - side lamp

12 volt, 5 watt, capless base W2, 1x9.5d, clear bulb surface - side lamps

approx. mid 1993 on

H4 - 12 volt, 60/55 watt, unified European P43t base, clear bulb surface

H4 - 12 volt, 60/55 watt, unified European P43t base, yellow bulb surface

France only

H4 - 12 volt, 100/80 watt, unified European POR43t base, clear bulb surface

headlamp with pilot

upto introduction compact connectors

headlamp with pilot

1,3 SPI (1992-96)

WIPAC headlamp with plastic reflector

headlamp with pilot

from introduction compact connectors on

WIPAC headlamp with plastic reflector

with plug - for H4, Sealed Beam and Bilux headlamps without pilot

Clubman & Moke with separate side ligth

sealed beam headlamp, with pilot

UK only

for 7" headlamp - chromed screw-on type for headlamp bowl with 2 adjusting screws

not models with leveling headlamps

for 7" headlamp - chromed screw-on type for vehicles with self levelling headlamps

from VIN...BD064959 (from mid 1993 on)

for 7" headlamp – stainless steel screw-on type for headlamp bowl with 2 adjusting screws

for 'Carello' headlamp - chromed clip-on type

Innocenti Mini

chromed

for headlamp rim

only if metal headlamp bowl

for genuine drive and fog lamp

if fittet

for genuine drive lamps

? from (V)BD040686 ? from (V)BD1344455 Multi Point Injection for the inner lamps only

for genuine drive and fog lamp - right hand

from (V)BD1344455 Multi Point Injection

for genuine drive and fog lamp - left hand

from (V)BD1344455 Multi Point Injection

for spot and fog lamps with single bolt fixing - stainless steel. Supplied in pairs

from VIN...BD040686 and 1.3 Mpi from VIN...BD1344454 for the inner spot lamps only

kit controlling headlamps. A must for cars with halogen headlamps. Complete installation kit with 2 relays and all needed wiring and fittings

for original driving lamps in front bumper

Rover Cabriolet (1993-96)