Water pumps and pulleys
with bypass hose adaptor. Replacement pump with alloy body
with engines from 850 cc to 1098 cc
Required: 1
with bypass hose adaptor. Improved variant with cast alloy body
with 1275 cc A-Series engine
Required: 1
for bypass hose
not 1275 cc A-plus series
also used by cast iron water pumps
Required: 1
water pump
not 1275 cc A plus series
easy fitting
Required: 1
hose to adaptor
not 1275 cc A plus series
Required: 2
bypass adapter between water pump and cylinder head
if bypass not used
Required: 1
new item. Characteristic: no adaptor for by-pass hose
1275 cc, A-plus series, not Multi Point Injection
Required: 1
characteristic: No adaptor for by-pass hose
Multi Point Injection
no lug for fitting alternator
Required: 1
water pump to engine, long
A-plus series
alternative screw 315907 could be used
Required: 2
water pump to engine, short
A-plus series
alternative screw 7896 could be used
Required: 2
water pump to engine
not used on tapetite bolts 307039 and 307040
Required: 2
water pump, diameter: 4.7", cast iron
Germany only up to 11/85
Required: 1
water pump - identified by 3.875" diameter
Germany 11/1985 on
Required: 1
water pump - diameter: 4.75"
998 ccm models, except Germany (1985-92), 1275 cc Cooper Rover Special Products (1990), 1275 cc Mayfair and Sprite Carburetter models with manual transmission (1992-93) and 1.3 Spi (1991-96)
Required: 1
pulley to fan, 15/32" (12 mm) thick
Required: 1
pulley to fan, 11/16" (17 mm) thick
Clubman, 1275GT and Estate
Required: 1
metal type - mounted diagonal i.e. 2 blades must be fitted
up to 1984, optionally also usable as a tuning part for later models, except 1.3 Mpi
Required: 2
6 blade competition metal type
all models except 1.3 Mpi (1959-96)
Required: 1
for fan
up to 1984, optionally also usable as a tuning part for later models, except 1.3 Mpi
Required: 1
fitting fan and pulley to water pump
Required: 4
813 mms long
size depents on diameter of used pulleys on waterpump and alternator and must be messured on car if not known
Required: 1
825 mms long
size depents on diameter of used pulleys on waterpump and alternator and must be messured on car if not known
Required: 1
840 mm long
size depents on diameter of used pulleys on waterpump and alternator and must be messured on car if not known
Required: 1
multi V belt-type
Multi Point Injection
Required: 1
multi V drive belt
Multi Point Injection
Required: 1
multi V belt-type
Multi Point Injection
Required: 1
multi V belt-type
Multi Point Injection 1997 on only if A/C system
Required: 1
pulley to bracket
Multi Point Injection
Required: 1
drive belt tension pulley to bracket
Multi Point Injection
Required: 1
Belt tensioner
Multi Point Injection
Required: 1
adjusting tensioner pulley
Multi Point Injection
Required: 1
tensioner spindle
Multi Point Injection
Required: 1
and bracket for tensioner and pulley
Multi Point Injection
Required: 1
base plate to engine
Multi Point Injection
Required: 1
