Clutch hydraulics
with metal reservoir
could be replaced by cylinder with plastic reservoir
Required: 1
clutch master cylinder with metal reservoir. Plastic replacement
Required: 1
with plastic reservoir
also replacement for cylinder with metal reservoir
Required: 1
clutch master cylinder - identified by no external identification rings on the barrel of the cylinder end and a conical inner spring. Content: cup type main seal, ring seal and dust cover
early specification
Required: 1
clutch master cylinder - identified by two external identification rings on the barrel of the cylinder end and cylindrical inner spring. Content: two ring type main seals and dust cover
late models
Required: 1
fitting clutch master cylinder to body
Required: 2
under clutch master cylinder, to body
Required: 1
push rod clutch master cylinder to pedal
Required: 1
early specification
Required: 1
later specification
Required: 1
LHD, pre 1976, up to (V)124423
Required: 1
RHD, pre 1976, up to (V)124423
Required: 1
for clutch pedal
also used on brake pedal
Required: 1
for clutch pedal
up to (V)396448
Required: 1
for clutch pedal
LHD, (V)396449 on
Required: 1
for clutch pedal
RHD, (V)396449 on
Required: 1
pre 1976, up to (VIN)124423
also used on brake pedal
Required: 1
1976 (V)124423 on, up to (V)498952
could also be used on later cars
Required: 1
(V) BD498953 on
alternative 13933 could be used
Required: 1
clutch master cylinder to hose, length: 32"
all LHD models (1959-2000)
Required: 1
clutch master cylinder to clutch hose, length: 12"
all RHD models (1959-2000)
Required: 1
pipe to clutch slave cylinder
coil spring and diaphragm type clutch
Required: 1
for fitting hose
coil spring and diaphragm type clutch
Required: 1
for fitting hose
coil spring and diaphragm type clutch
Required: 1
hose to clutch slave cylinder
coil spring and diaphragm type clutch
Required: 1
coil spring and diaphragm type clutch
Required: 1
clutch slave cylinder
coil spring and diaphragm type clutch
Required: 1
fitting clutch slave cylinder to flywheel housing
coil spring and diaphragm type clutch
Required: 1
fitting clutch slave cylinder
coil spring and diaphragm type clutch
Required: 2
for fitting hose
Verto type clutch 1982 on
Required: 1
for fitting hose
Verto type clutch 1982 on
Required: 1
for fitting hose to clutch slave cylinder
Verto type clutch 1982 on
Required: 1
for banjo bolt
Verto type clutch 1982 on
Required: 1
for banjo
Verto type clutch 1982 on
Required: 1
Verto type clutch 1982 on
Required: 1
for clutch slave cylinder
Verto type clutch 1982 on
Required: 1
fitting clutch slave cylinder to mounting plate
Verto type clutch 1982 on
Required: 2
fitting clutch slave cylinder to mounting plate
Verto type clutch 1982 on
Required: 2
clutch slave cylinder
Verto type clutch 1982 on
Required: 1
fitting mounting plate to flywheel housing
Verto type clutch 1982 on
Required: 2
for screw mounting plate
Verto type clutch 1982 on
Required: 2
fitting mounting plate to clutch cover
Verto type clutch 1982 on
Required: 1
for screw mounting plate
Verto type clutch 1982 on
Required: 1
mounting plate to clutch cover
Verto type clutch 1982 on
Required: 1
