SU-HS2 internal twin carburettor
with vent and hexagonal black plastic head - length of the rod: 2.125"
Required: 2
fixed type - marked: AN - standard mixture
Cooper 970 cc
carburettor type: AUD151
Required: 2
fixed type - marked: EB
Cooper 970 cc
carburettor type: AUD151
Required: 2
fixed type - marked: H6 - rich mixture
Cooper 970 cc
carburettor type: AUD151
Required: 2
fixed type - marked: GZ - standard mixture
Cooper 997 cc
carburettor type: AUD15
Required: 2
fixed type - marked: EB
Cooper 997 cc
carburettor type: AUD15
Required: 2
fixed type - marked: AH2 - rich mixture
Cooper 997 cc
carburettor type: AUD15
Required: 2
fixed type for SU carburettors - marked: GY
Cooper 998 cc with carburettor AUD104
Required: 2
fixed type - marked: GG
Cooper 998 cc
carburettor type: AUD104
Required: 2
fixed type - marked: M - rich mixture
Cooper 998 cc
carburettor type: AUD104
Required: 2
fixed type - marked: H6 - standard mixture
Cooper 1071 cc
carburettor type: AUD99
Required: 2
fixed type - marked: EB
Cooper 1071 cc
carburettor type: AUD99
Required: 2
fixed type - marked: No.3 - rich mixture
Cooper 1071 cc
carburettor type: AUD99
Required: 2
fixed type - marked: M - standard mixture
Cooper 1275 cc
carburettor type: AUD146, AUD440
Required: 2
fixed type - marked: EB
Cooper 1275 cc
carburettor type: AUD146, AUD440
Required: 2
fixed type - marked: AH2 - rich mixture
Cooper 1275 cc
carburettor type: AUD146, AUD440
Required: 2
for carburettor piston
if fitted
Required: 2
for piston lifting pin
if fitted
Required: 2
RH SU-HS2 carburettors - supplied with float
Required: 1
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Required: 2
for SU carburettors - bore: 0.070"
alternative grose jet 19687 could be used
Required: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
alternative for needle valve 16334
Required: 2
float chamber - left hand
30¡ã angeled
Required: 1
float chamber - rigth hand
30¡ã angeled
Required: 1
rear carburettor - Diameter: 0.090". Identification: green marking sleeve
indentification sleeve: green
Required: 1
0.090" - right hand
indentification sleeve: pink
Required: 1
with 3/8"-26 BSB coarse threat - for SU-HS carburettors with fixed metering needle
carburettors with fixed needle
Required: 2
with 3/8"-26 BSB coarse threat - for SU-HS carburettors with fixed metering needle
carburettors with fixed needle
Required: 2
for mixture adjusting on main jet - variant with 3/8"-26 BSB coarse threat
for mixture adusting
Required: 2
choke lever - left hand - pair
Required: 1
choke lever - right hand - pair
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU HS2 carburettors with 5/16" throttle spindle
Required: 4
throttle spindle on front and rear carburettor - stainless steel reproduction
Required: 2
for two SU-HS2 type carburtettors
Required: 1
for two SU-HS2 type carburtettors. Comprising service kit 200208 plus throttle discs and throttle spindles
Required: 1
spring loaded type - marked: AAZ
1275 cc
alternative if this type carburettor is fitted
Required: 2
spring loaded type - marked: AAP
Innocenti Cooper 1300
carburettor type: AXE139/140
Required: 2
spring loaded metering needle
Required: 2
