Brake pipes - dual line diagonal split with 4 way failure switch
hose to wheel cylinder or caliper
Required: 2
for fitting hose to subframe
Required: 2
retaining brake hose to subframe front
Required: 2
steel, female, 3/8" x 24 UNF - for 3/16" pipe
Required: 1
assembly, fitted on bulkhead
Required: 1
pressure failure on vehicles with dual line braking system - identified by 3/8"-24 UNF thread
Required: 1
retaining failure switch to bulkhead
Required: 1
to connect brake pipe to pressure failure switch
Required: 1
fitting banjo connector to pressure failure switch
Required: 1
3/8", banjo to failure switch
Required: 1
7/16", banjo bolt to banjo failure switch
Required: 1
retaining brake hose to radius arm and subframe
Required: 6
bridge between front wheel cylinders
if drum brake front
Required: 2
Aeroquip type, set with 4 lines, front and rear
if brake drums on front
Required: 1
stainless steel braided, set with 4 lines
all models with front disc brakes
Required: 1
stainless steel braided and black coated, set with 4 lines
all models with front disc brakes
Required: 1
