Front end repair panels - MK3 on
genuine BMHT - upper dash rail below windscreen
Required: 1
windscreen frame, lower section
Required: 1
windscreen frame half scuttle - right hand
Required: 1
windscreen frame half scuttle - left hand
Required: 1
windscreen frame lower corner - right hand
Required: 1
windscreen frame lower corner - left hand
Required: 1
inner windscreen frame corner - right hand
Required: 1
inner windscreen frame corner - left hand
Required: 1
inner wing end to 'A' post - right hand
3" deep
Required: 1
inner wing end to 'A' post - left hand
3" deep
Required: 1
inner wing end to 'A' post - right hand
6" deep, with hole for face vent
Required: 1
inner wing end to 'A' post - left hand
6" deep, with hole for face vent
Required: 1
with bracket for strap - right hand
Required: 1
with bracket for strap - left hand
Required: 1
RH front - including A-post
late type - Genuine BMHT
Required: 1
half inner wing, front - right hand
Required: 1
LH front - genuine BMHT with slats for radiator but without hole for face vent
to 1976
Required: 1
front - left hand, to A-panel
from 1976 to 1992, except 1275 cc models from 1990 onwards
Required: 1
LH inner front wing - front section with slats for radiator
upto 1992, not 1275 cc 1990 on
Required: 1
on inner wing - left hand
early MK3
Required: 1
front - left hand
1275 cc, 1990 on upto 1997
specification with round fan hole - genuine BMHT
Required: 1
LH front - including A-post. Variant with round fan hole
1275 cc models from 1990 to 1996
Required: 1
half inner wing front - left hand
1275 cc, 1990 on upto 1997
specification with round fan hole
Required: 1
front - left hand
1997 on, Multi Point Injection
plain specification - genuine BMHT
Required: 1
front - left hand, cpl. with A-panel
1997 on, Multi Point Injection
plain specification - genuine BMHT
Required: 1
RH front - variant without hole for side repeater
to October 1985
Required: 1
RH front - variant without hole for side repeater. Genuine BMHT wing
to October 1985
Required: 1
RH front - variant with hole for side repeater
from November 1985 to mid of 1993 - Feature: vehicles with non levelling headlampd
Required: 1
RH front. Variant with hole for side repeater and no aerial hole - OE British Motor Heritage manufactured. Please note that modifications are required when fitting 13" wheels
1.3 Spi and 1.3 Mpi with levelling headlamps (1993-2000)
Required: 1
LH front - variant without hole for side repeater
to October 1985
Required: 1
LH front - variant without hole for side repeater. Genuine BMHT wing
to October 1985
Required: 1
LH front - variant with holes for side repeater and aerial
from November 1985 to mid of 1993 - Feature: vehicles with non levelling headlampd
Required: 1
LH front - variant with hole for side repeater but no hole for aerial
from November 1985 to mid of 1993 - Feature: vehicles with non levelling headlampd
Required: 1
LH front. Variant with hole for side repeater and aerial hole - OE British Motor Heritage manufactured. Please note that modifications are required when fitting 13" wheels
1.3 Spi and 1.3 Mpi with levelling headlamps (1993-2000)
Required: 1
LH front. Variant with hole for side repeater and no aerial hole - OE British Motor Heritage manufactured. Please note that modifications are required when fitting 13" wheels
1.3 Mpi with levelling headlamps (1997-2000)
Required: 1
wheel arch - front wing
Sportspack modells and conversions to 13" wheels
Required: 2
wheel arch - front wing
Sportspack modells and conversions to 13" wheels
Required: 1
for fitting headlamp bowl
(1959-94)
not for cars with leveling headlamp
Required: 2
for fitting headlamp bowl
Vehicles with headlamp levelling (1994-2000)
Required: 2
aftermarket - hinge fitting 1" and 6.25" from edge possible, with support panel for front chrome moulding
upto 1997, Multi Point Injection
Required: 1
genuine BMHT quality
upto 1997, Multi Point Injection
Required: 1
steel. OE British Motor Heritage manufactured
1.3 Mpi (1997-2000)
Required: 1
chrome moulding to bonnet front
Required: 1
aftermarket - for vehicles with fixed subframe
upto 1976
Required: 1
genuine BMHT - for vehicles with fixed subframe
upto 1976 with fixed subframe
alternative front valance 316255 could be used
Required: 1
reproduction
from 1976 to 1996, rubber mounted subframe
Required: 1
genuine BMHT
from 1976 to 1990, rubber mounted subframe
alternative repro front panel 213791 could be used
Required: 1
genuine BMHT
from 1990 to 1996, rubber mounted subframe
Required: 1
aftermarket
1.3 Mpi (1996-2000)
Required: 1
genuine BMHT
1.3 Mpi (1996-2000)
Required: 1
front panel corner - right hand
Required: 1
front panel corner - left hand
Required: 1
Slam panel
upto 1997, Multi Point Injection
Required: 1
Slam panel
1997 on, Multi Point Injection
Required: 1
Footwell floor panel to bulkhead, incl. steering retaining plate
1976 on - rubber mounted subframe
Required: 1
