Chassis frame and body mountings
new item
1600
Required: 1
new
1622
Required: 1
new item
Twin Cam and De Luxe
Required: 1
28 piece
1500, 1600 and 1622
Required: 1
- 28 piece kit
Twin Cam and De Luxe
Required: 1
body to chassis. Complete car set
Required: 1
black
Required: 1
Content: 500 ml (?60.00 / 1000 ml)
black
Required: 1
Content: 400 ml (?71.43 / 1000 ml)
in the front area of the chassis frame
Required: 1
Toe board panel to chassis goal post
Required: 9
Toe board panel to chassis goal post
Required: 9
starter switch
Must be welded to chassis
Required: 1
chassis rail outer
Length: 1 meter
Required: 2
chassis rail inner
Length: 1 meter
Required: 2
22496
Required: 6
wiring loom and battery cable
Required: 6
p-shaped metal clip with 1/4" clamping range and 7/32" fixing hole diameter
Required: 2
Securing check strap to chassis
Required: 2
Securing check strap to chassis
Required: 2
- length: 3.3/4"
Bumper bracket to chassis
Required: 2
3/4" x 5/16" UNF
Bumper bracket to front extension
Required: 6
Bumper bracket to front extension
Required: 6
LH footwell area, stainless steel
Required: 1
RH footwell area, stainless steel
Required: 1
with countersunk head
Closing panel to chassis goal post
Required: 6
with panhead - length: 3/8"
Closing panel to chassis goal post
Required: 8
No.10 with 5/8" length - galvanised screw with Phillips PZ2 cross slotted panhead
Closing panel to chassis goal post
Required: 2
Closing panel to chassis goal post
Required: 2
footwell crossmember - length: 60 cm
Required: 2
14 piece kit to fix floorboards to chassis. Please note: The rails must be welded to the chassis frame
Required: 1
7 piece set made from water resistant plywood
1500 to chassis no. 61503
Required: 1
7 piece set made from water resistant plywood
1500 from chassis no. 61504, all 1600, 1622, Twin Cam and De Luxe
Required: 1
self tapping
Fixing floor board carpet
Required: 12
1500 to chassis no. 61503
Required: 1
1500 from chassis no. 61504, all 1600, 1622, Twin Cam and De Luxe
Required: 1
remote control housing cover to gearbox tunnel
Required: 1
remote control housing
Required: 1
remote control housing cover to gearbox tunnel
Required: 8
gear lever gaiter - made from stainless steel
Required: 1
without seat belt fixing points
1500, 1600 and Twin Cam
Required: 1
with seat belt fixing points
1622 and De Luxe
Required: 1
starter motor
1500 from chassis no. 61504, all 1600, 1622, Twin Cam and De Luxe
Required: 1
dipstick hole on gearbox tunnel
Required: 1
between gearbox tunnel an footwell crossmember
Required: 2
gearbox tunnel to footwell crossmember
Required: 2
Content: 500 ml (?60.00 / 1000 ml)
Content: 400 ml (?71.43 / 1000 ml)
