Exhaust system without catalyst - 5.3 V12 models
stainless steel - comes with down pipes but less tail pipes. Characteristic: 4 bolt flange fitting rear axle pipes with sleeve
XJS 5.3 V12 European models without catalytic converter to VIN...188104 (1975-93)
Required: 1
stainless steel - comes less down pipes and tail pipes. Characteristic: 2 bolt flange fitting, rear axle pipes with olive
XJS 5.3 V12 European models without catalytic converter to VIN...188104 (1975-93)
Required: 1
26 piece set with stainless steel exhaust clamps
XJS 5.3 V12 to VIN...188104 (1975-93)
Required: 1
RH - mild steel. Characteristic: 4 stud fixing
XJS 5.3 V12 LHD to commission no. 2W53172 and RHD bis 2W2540
Alternatively, the downpipe with 2-hole mounting (order number 206767) can be used, the hole spacing is identical.
Required: 1
RH - mild steel. Characteristic: 4 stud fixing
XJS 5.3 V12 LHD from commission no. 2W53173 and RHD from 2W2541 to VIN...101800
Alternatively, the downpipe with 2-hole mounting (order number 206767) can be used, the hole spacing is identical.
Required: 1
RH - mild steel. Characteristic: 2 stud fixing
XJS 5.3 V12 LHD from VIN...101801
Required: 1
RH - stainless steel. Characteristic: 2 stud fixing
XJS 5.3 V12 LHD from VIN...101801
Required: 1
LH - mild steel. Characteristic: 4 stud fixing
XJS 5.3 V12 LHD to commission no. 2W53172 and RHD bis 2W2540
Alternatively, the downpipe with 2-hole mounting (order number 206767) can be used, the hole spacing is identical.
Required: 1
LH - mild steel. Characteristic: 4 stud fixing
XJS 5.3 V12 LHD from commission no. 2W53173 and RHD from 2W2541 to VIN...101800
Alternatively, the downpipe with 2-hole mounting (order number 206767) can be used, the hole spacing is identical.
Required: 1
LH - mild steel. Characteristic: 2 stud fixing
XJS 5.3 V12 LHD from VIN...101801
Required: 1
LH - stainless steel. Characteristic: 2 stud fixing
XJS 5.3 V12 LHD from VIN...101801
Required: 1
down pipe to exhaust manifold
Required: 4
down pipe to exhaust manifold, aftermarket
Required: 4
retaining down pipe to exhaust manifold
XJS 5.3 V12 LHD to VIN...101800
Required: 16
retaining down pipe to exhaust manifold
XJS 5.3 V12 LHD from VIN...101801
Required: 8
retaining down pipe to exhaust manifold
XJS 5.3 V12 LHD to VIN...101800
Required: 16
retaining down pipe to exhaust manifold
XJS 5.3 V12 LHD from VIN...101801
Required: 8
RH - mild steel
XJS 5.3 V12 LHD to commission no. 2W53172 and RHD bis 2W2540
Required: 1
RH - mild steel
XJS 5.3 V12 LHD from commission no. 2W53173 and RHD from 2W2541
Required: 1
RH - stainless steel
XJS 5.3 V12 LHD from commission no. 2W53173 and RHD from 2W2541
Required: 1
LH - mild steel
XJS 5.3 V12 LHD to commission no. 2W53172 and RHD bis 2W2540
Required: 1
LH - mild steel
XJS 5.3 V12 LHD from commission no. 2W53173 and RHD from 2W2541
Required: 1
LH - stainless steel
XJS 5.3 V12 LHD from commission no. 2W53173 and RHD from 2W2541
Required: 1
retaining exhaust to down pipe
Required: 6
exhaust - identify by 44 mm inner diameter
Required: 2
retaining centre silencer to intermediate pipe
Required: 6
retaining centre silencer to intermediate pipe
Required: 6
retaining centre silencer to intermediate pipe
Required: 6
over axle, RH side - stainless steel
Required: 1
over axle, LH side - stainless steel
Required: 1
RH - reproduction in stainless steel
XJS 5.3 V12 to VIN...105047 (1975-81)
Required: 1
LH - reproduction in stainless steel
XJS 5.3 V12 to VIN...105047 (1975-81)
Required: 1
RH - reproduction in stainless steel
XJS 5.3 V12 from VIN...105048 (1981-91)
Required: 1
LH - reproduction in stainless steel
XJS 5.3 V12 from VIN...105048 (1981-91)
Required: 1
stainless steel, intermediate pipe to rear silencer
Required: 2
rear mounting, complete unit with bracket and rubber
Required: 2
rear mounting, variant without bracket
Required: 2
