Automatic gearbox Borg Warner model 12 - outer - 5.3 V12 models
including torque converter, model: BW12-TR2 - reconditioned, in exchange
Required: 1
Required: 1
- length: 2.1/2"
Bell housing to engine
Required: 4
- length: 1.1/2"
Bell housing to engine
Required: 4
Required: 2
Required: 2
automatic transmission - length: 33"
Required: 2
worm type - for hoses from 3/8" to 1/2" diameter
Required: 2
gearbox to oil cooler
Required: 1
gearbox to oil cooler
Required: 1
oil pipe
Required: 1
oil pipe
Required: 1
oil pipe
Required: 1
with breather
Required: 1
made from nitrile rubber. Inner diameter: 5/16", outer diameter: 1/2", cotton braided
Required: 1
breather hose to gearbox
Required: 1
oil pipe
Required: 2
Required: 2
- exchange
Required: 1
If not available use oil seal and o-ring set 201659
Required: 1
kick-down on automatic transmission BW12
Required: 1
oil pipe
Required: 1
rear brake band
Required: 1
Required: 1
front pump to casing
If not available use oil seal and o-ring set 201659
Required: 1
front
Required: 1
between front and middle gearbox casing
If not available use gasket set 201966
Required: 1
securing cover plate
Required: 2
sealing governor inspection aperture
Required: 1
Hightec ATF 4000
Required: 1
middle
Required: 1
Required: 2
between gearbox casing and extension
If not available use gasket set 201966
Required: 1
Required: 1
speedometer
To 2E3922, 2R53929, 2P1870, 2P50069, 2K2196, 2K50081, 2G1014, 2G50036, 2F1003 and 2F50000
Required: 1
speedometer
From 2E3923, 2R53930, 2P1871, 2P50070, 2K2197, 2K50082, 2G1015, 2G50037, 2F1004 and 2F50001
Required: 1
rear extension
Required: 1
If not available use oil seal and o-ring set 201659
Required: 1
Required: 1
with 15 teeth - for vehicles with BW12 automatic transmission
Required: 1
speedometer - 12 teeth - BW12. Use with 3.07:1 axle ratio
Required: 1
manual valve lever shaft
If not available use oil seal and O-ring set 201659
Required: 1
Required: 1
for pressure test
Required: 1
Required: 1
retaining lever to shaft
Required: 1
manual valve lever shaft
Required: 1
torsion lever
Required: 1
Required: 1
Required: 1
Required: 1
Required: 1
with spring, toggle lever
Required: 1
Required: 1
Required: 1
Required: 1
retaining toggle pin
Required: 1
toggle link
Required: 1
Required: 1
toggle lever
Required: 1
for BW8 and BW12 automatic tranmissions
Required: 1
for BW8 and BW12 automatic tranmissions. Uprated Duraprene variant
Required: 1
for BW12 automatic transmission - used item
Required: 1
for BW12 automatic transmission. Uprated aluminium version
Required: 1
retaining oil sump
Required: 3
for BW8 automatic transmission
Required: 1
BW12 automatic transmission
Required: 1
