Instruments - TR6 from September 1972
with range in KP/H, chrome bezel, flat glass and 680 turns - Smiths no. SN6411/05. Reconditioned, in exchange
TR6 PI models from chassis no. CR1 with 3.45:1 final ratio and 165 section tyres (from September 1972)
Required: 1
with range in KP/H, chrome bezel, flat glass and 680 turns - Smiths no. SN6411/09. Reconditioned, in exchange
TR6 PI models from chassis no. CR1 with 3.45:1 final ratio and 165 section tyres (from September 1972)
Required: 1
with range in MP/H, chrome bezel, flat glass and 1120 turns - Smiths no. SN6411/04. Reconditioned, in exchange
TR6 PI models from chassis no. CR1 with 3.45:1 final ratio and 165 section tyres (from September 1972)
Required: 1
with range in KP/H, chrome bezel, flat glass and 680 turns - Smiths no's. SN6411/01 and SN6411/07. Reconditioned, in exchange
TR6 Carburettor models from chassis no. CF1 with 3.7:1 final ratio and 185 section tyres (from September 1972)
Required: 1
with range in MP/H, chrome bezel, flat glass and 1120 turns - Smiths no's. SN6411/02 and SN6411/06. Reconditioned, in exchange
TR6 Carburettor models from chassis no. CF1 with 3.7:1 final ratio and 185 section tyres (from September 1972)
Required: 1
with range in MP/H, chrome bezel, flat glass and 1000 turns - Smiths no's. SN6411/10 and SN6411/11 Reconditioned, in exchange
TR6 Carburettor models from chassis no. CF1 with 3.7:1 final ratio and 185 section tyres (from September 1972)
Required: 1
model no.: RN2414/00. Feature: mechanical drive, chrome bezel, flat glass - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
Required: 1
for speedometer and tachometer
Required: 2
for speedometer and tachometer
round profile, inner
Required: 2
for speedometer and tachometer
square profile, outer
Required: 2
for speedometer and tachometer
Required: 2
for bulbs with BA9s bayonet base - variant with screw connection for single wire
Required: 4
for gauges with studs with 3BA thread - in aluminium with 1/2" outer diameter
Required: 4
for gauges with studs with 3BA thread - in brass with 1/2" outer diameter
Required: 4
for speedometer and tachometer
Required: 4
voltage stabilizer to speedometer
Required: 1
speedometer cable
Overdrive models only
Required: 1
with 69" length
All models without service interval indicator. USA and California models to CF35000.
Required: 1
with 72" length
All models without service interval indicator. USA and California models to CF35000.
Required: 1
speedometer - gearbox to service interval indicator
USA and California models from CF35001
Required: 1
speedometer - service interval indicator to speedo
USA and California models from CF35001
Required: 1
service interval - serial no. SIC1001/125
USA and California models from CF35001
Required: 1
service interval - serial no. SIC1001/250
USA and California models from CF35001
Required: 1
for resetting service interval indicator
USA and California models from CF35001
Required: 1
service interval indicator to bulkhead
USA and California models from CF35001
Required: 1
service interval indicator to bracket
USA and California models from CF35001
Required: 2
USA and California models from CF35001
Required: 2
USA and California models from CF35001
Required: 2
USA and California models from CF35001
Required: 2
speedo cable to chassis
LHD models without overdrive
Required: 1
speedo cable through bulkhead and wheel arch gusset
Required: 2
for speedometer and tachometer
Made from rubber
Required: 2
with 36" length - for LHD models
Required: 1
with 48" length
RHD models
Required: 1
PL2319/00, black with white illumination and clear glass, chrome bezel - reconditioned, in exchange
Required: 1
oil pressure pipe to cylinder block
Required: 1
between oil gauge and cylinder block
TR6 P.I.
Required: 1
between oil gauge and cylinder block
TR6 Carburettor
Required: 1
oil feed pipe to bulkhead
Required: 1
oil feed pipe to bulkhead
Required: 1
BF2232/00, black with white illumination and clear glass, chrome bezel - reconditioned, in exchange
Required: 1
BT2230/00 resp. BT2230/01, black with white illumination and clear glass, chrome bezel - new item
Required: 1
water temperature - on inlet manifold, water pump housing, thermostat housing or water rail
Required: 1
exchange - serial no. BV2213/00
Required: 1
auxiliary gauges - in metal with insulation to the bracket, for two cables - variant with E10/13 screw base for bulb 2877
Required: 4
for gauges with studs with 3BA thread - in aluminium with 1/2" outer diameter
Required: 8
for gauges with studs with 3BA thread - in brass with 1/2" outer diameter
Required: 8
electrical 12 volt clock CA1100-01 with 52 mm diameter. Black dial with white illumination, flat glass, chrome bezel, range: 12 hours with external rest switch. Variant with internal lit
Required: 1
