Fuel injection system and fuel filter - 2.25 diesel engine, Serie III
fuel filter to mechanical fuel pump and to distributor pump
Required: 1
Required: 1
Required: 1
cable operated type - reconditioned, in exchange
Required: 1
retaining distributor pump to cylinder block
Required: 3
retaining distributor pump to cylinder block - imperial
Serie III to engine no. 36619419B
Required: 3
retaining distributor pump to cylinder block - metric
Serie III from engine no. 36619420B
Required: 3
retaining distributor pump to cylinder block - imperial
Serie III to engine no. 36619419B
Required: 3
retaining distributor pump to cylinder block - metric
Serie III from engine no. 36619420B
Required: 3
idendify: rod operated throttle
Required: 1
indentify: cable operated type
Required: 1
lever
idendify: rod operated throttle
Required: 1
lever
indentify: cable operated type
Required: 1
injector pipe
Required: 6
retaining fuel injector - imperial
Serie III to engine no. 36619419B
Required: 8
retaining fuel injector - metric
Serie III from engine no. 36619420B
Required: 8
retaining fuel injector - imperial
Serie III to engine no. 36619419B
Required: 8
retaining fuel injector - metric
Serie III from engine no. 36619420B
Required: 8
retaining fuel injector - imperial
Serie III to engine no. 36619419B
Required: 8
retaining fuel injector - metric
Serie III from engine no. 36619420B
Required: 8
4th cylinder injector to fuel return pipe
Required: 1
return to tank
88 an 109 models
Required: 1
return pipe to fuel tank
109 Station models
Required: 1
p-shaped metal clip with 1/4" clamping range and 7/32" fixing hole diameter
Required: 1
fuel pipe to distributor pump
Required: 1
distributor pump to fuel filter
Required: 1
return pipe from fuel filter to fuel tank
Required: 1
fuel filter blanking plug
Required: 2
fuel filter bowl
early filter type
Required: 1
fuel filter bowl, upper position
late filter type with two sealing rings
Required: 1
fuel filter bowl, lower position - not shown
late filter type with two sealing rings
Required: 1
Befestigung Kraftstofffilter an Karosserie
Required: 2
Befestigung Kraftstofffilter an Karosserie
Required: 2
sedimentor to fuel tank
88 and 109 medels
Required: 1
sedimentor to fuel tank
109 Station models
Required: 1
sedimentor
Required: 1
fuel pipe
Required: 1
No.10 with 5/8" length - galvanised screw with Phillips PZ2 cross slotted panhead
Required: 1
fuel pipe
Required: 1
retaining clip to bracket and bracket to chassis
Required: 3
retaining clip to bracket and bracket to chassis
Required: 3
retaining clip to bracket and bracket to chassis
Required: 3
fuel pipe
Required: 1
Retaining clip to chassis
Required: 2
retaining fixing plate
Required: 1
fuel pipe between distributor pump and injector
Required: 4
for fixing plate
Required: 4
