Ignition coil, ignition leads and spark plugs
with black body, screw-in HT lead terminal and approx. 2.8 Ohm primary resistance. Non ballasted type
Required: 1
with push-in HT lead terminal and approx. 2.8 Ohm primary resistance. Non ballasted type
Required: 1
with push-in HT lead terminal and approx. 2.8 Ohm primary resistance. Non ballasted type
Required: 1
on acorn nut
ignition coil with screw-in HT lead
Required: 1
ignition lead to coil
ignition coil with screw-in HT lead
Required: 1
ignition lead to ignition coi
ignition coil with screw-in HT lead
Required: 1
for ignition coil with 'Lucas' lettering. Size: 77 x 28 mm
Required: 1
ignition lead to ignition coil - 3 piece set
ignition coil with push-in HT lead
Required: 1
screwed into cooper ignition lead
ignition coil with push-in HT lead
Required: 1
ignition lead to ignition coil and to distributor cap
ignition coil with push-in HT lead
Required: 1
with copper wire in silicone core and black PVC jacket
HT lead to distributor cap
Serie II and IIA (1958-1967)
please use 6 pieces for 6-cylinder models
Required: 4
on acorn nut
Serie II and IIA (1958-1967)
please use 6 pieces for 6-cylinder models
Required: 4
- original version
Serie II and IIA (1958-1967)
please use 6 pieces for 6-cylinder models
Required: 4
spark plug resistor - original version
Serie II and IIA (1958-1967)
please use 6 pieces for 6-cylinder models
Required: 4
for sparking plug - original version
Serie II and IIA (1958-1967)
please use 6 pieces for 6-cylinder models
Required: 4
identify by acorn nuts to fix ignition leads
Series II and IIA (1958-71): 4 cylinder Petrol
Required: 1
for Lucas 22D6 distributor with side entry. Identify by push fit ignition leads
Early Series IIA 6 cylinder models (May 1967 to May 1968)
Required: 1
for Lucas 22D6 and 25D6 top entry distributor. Identified by push fit ignition leads
Series IIA 6 cylinder models from May 1968 and all Series III 6 cylinder models (1971-85)
Required: 1
for ignition leads
Early Series IIA 6 cylinder models (May 1967 to May 1968)
Required: 1
made from rubber - length: 5.1/2"
Early Series IIA 6 cylinder models (May 1967 to May 1968)
Required: 1
90° angled - plastic reproduction with Champion lettering
Serie IIA (1967-1971)
please use 6 pieces for 6-cylinder models
Required: 4
straight - replacement type with 5 Kilo Ohm
alternativ
Required: 4
90° angled - fits directly to the spark plug
Required: 4
60° angled - fits directly to the spark plug
Required: 4
for top entry distributor cap. Identify by push fit ignition leads
Series III (1971-85): all 4 cylinder petrol
Required: 1
for Lucas 22D6 and 25D6 top entry distributor. Identified by push fit ignition leads
Series IIA 6 cylinder models from May 1968 and all Series III 6 cylinder models (1971-85)
Required: 1
for Lucas 35D8 distributors
Series III V8 (1979-85)
Required: 1
for ignition leads on eight cylinder models
Series III V8 (1979-85)
Required: 3
for petrol engines with 7:1 compression
Serie II, IIA and III 4 cylinder models
Required: 4
for petrol engines with 8:1 compression
Serie II, IIA and III 4 cylinder models
Required: 4
Serie II, IIA and III 6 cylinder models
Required: 6
for petrol engines with 7:1 compression
Serie II, IIA and III 4 cylinder models
Required: 4
for petrol engines with 8:1 compression
Serie II, IIA and III 4 cylinder models
Required: 4
Serie II, IIA and III 6 cylinder models
Required: 6
