Rear axle Banjo type
Disc wheels only
Required: 1
Wire wheels only
Required: 1
differential retaining
Required: 10
rebound strap. Must be welded to the rear axle casing
Required: 2
Required: 1
differential - identified by 25 inner splines, 16 outer splines and 17.3 mm flange height
Required: 2
planet gear shaft
Required: 1
3.9:1 (10/39 teeth)
Standard
Required: 1
4.1:1 (10/41 teeth)
Optional
Required: 1
4.3:1 (10/43 teeth)
Optional
Required: 1
4.55:1 (9/41 teeth)
Optional
Required: 1
differential
Required: 1
outer pinion bearing - 0.006"
Selective
outer pinion bearing - 0.008"
Selective
outer pinion bearing - 0.010"
Selective
propshaft to differential
Required: 1
with 25 splines. For vehicles with disc wheels
Required: 2
half shaft to hub
Disc wheels
Required: 2
L/H, 12 TPI
Roadster to GHN3-30850 (February 1964)
Required: 1
R/H, 12 TPI
Roadster to GHN3-30850 (February 1964)
Required: 1
L/H, 8 TPI
From GHN3-30851 to GHN3-132922 (February 1964 to July 1967)
Required: 1
R/H, 8 TPI
From GHN3-30851 to GHN3-132922 (February 1964 to July 1967)
Required: 1
with 25 splines. For wire wheel cars only
Required: 2
Wire wheels
Required: 8
with new crown wheel and pinion. Ratio: 3.9:1 (10/39 teeth) - reconditioned, in exchange
Required: 1
ratio: 4.1:1 (10/41 teeth) - exchange
New crown wheel and pinion fitted
Required: 1
ratio: 4.3:1 (10/43 teeth) - exchange
New crown wheel and pinion fitted
Required: 1
ratio: 4.55:1 (9/41 teeth) - exchange
New crown wheel and pinion fitted
Required: 1
for half shaft with 25 splines
Required: 1
