SU-HIF6 internal carburettor
Required: 2
with piston
Required: 2
spring loaded type for SU-HIF44 carburettors AUD613 - marked: BBU with 0.100" diameter
Required: 2
L/H carburettor
Required: 1
complete unit with bearing and locking nut. For vehicles with SU-HIF carburettors with spring loaded metering needle
Required: 2
LH SU-HIF carburettor - diametre: 0.100" and black marking sleeve
Required: 1
carburettor preheating at SU-HIF carburettors
Required: 2
for SU carburettors - bore: 0.096"
Required: 2
Superior replacement of needle valve and seat
Required: 2
with carburettor gasket set for SU HIF carburettors, actuation on the right - unsinkable float made of nitrile rubber
Required: 1
with carburettor gasket set for SU HIF carburettors, actuation LH - RH carburettor - unsinkable float made of nitrile rubber
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Required: 4
L/H carburettor
Required: 1
R/H carburettor
Required: 1
R/H carburettor
Required: 1
lost motion lever R/H carburettor
Required: 1
L/H carburettor
Required: 1
R/H carburettor
Required: 1
starter valve
Required: 2
starter lever - L/H carburettor
Required: 1
starter lever - R/H carburettor
Required: 1
for two SU-HIF6 type carburtettors
Required: 1
for two SU-HIF6 type carburettors. Comprising service kit 214280 plus throttle discs and throttle spindles
Comprising service kit 214280 plus throttle disc and throttle spindle
Required: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Required: 1
