Zenith Stromberg 175 CD5T internal carburettor
suction chamber
Required: 1
for Zenith Stromberg 175CD carburettor
Required: 1
45G
3824 and 3918 carburettors
Required: 1
fixed type for Zenith Stromberg carburettors with reference no. 3766, 3767 and 3851 - marked: 45H
Required: 1
45J type. Fitted to carburettor with ref. no. 3764
Required: 1
Required: 1
throttle disc retaining on Zenith Stromberg carburettors
Required: 2
fast idle
Required: 1
fast idle
Required: 1
fast idle screw
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on Zenith Stromberg carburettors with 7 mm throttle spindle
Required: 2
throttle spindle stop
Required: 1
throttle spindle
Required: 1
to 1977- 3823, 3824 and 3766 carburettors
Required: 1
1977 on - 3764, 3765, 3767, 3851 and 3918 carburettors
Required: 1
exchange
Old unit first
Required: 1
air regulator valve
If not available use gasket set 550191
Required: 1
air regulator
to 1977- 3823, 3824 and 3766 carburettors
Required: 1
air regulator
1977 on - 3764, 3765, 3767, 3851 and 3918 carburettors
Required: 1
vacuum piston
Required: 1
automatic choke unit
If not available use gasket set 9501 (ill. 58)
Required: 1
Required: 3
automatic choke
Required: 1
Required: 1
long - housing retaining
Required: 2
automatic choke retaining - length: 1/2"
Required: 1
for Zenith Stromberg carburettor - unsinkable float made of nitrile rubber
Required: 1
for Zenith Stromberg 175CD carburettors - bore: 1.75 mm
Required: 1
for Zenith Stromberg carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Required: 1
If not available use gasket set 9501 (ill. ???)
Required: 1
to 1977- 3823, 3824 and 3766 carburettors
Required: 1
long, and washer, float chamber retaining
to 1977- 3823, 3824 and 3766 carburettors
Required: 4
short, and washer, float chamber retaining
to 1977- 3823, 3824 and 3766 carburettors
Required: 2
1977 on - 3764, 3765, 3767, 3851 and 3918 carburettors
Required: 1
long, and washer, float chamber retaining
1977 on - 3764, 3765, 3767, 3851 and 3918 carburettors
Required: 6
float chamber on Zenith Stromberg carburettors - made of plastic with brass cap and 'O' ring
Required: 1
services one Zenith Stromberg 175CD and 150CD4T carburettor
Required: 1
for one Zenith Stromberg 175CD carburettor with automatic choke
Required: 1
for one Zenith Stromberg 175CD carburettor with automatic choke
Required: 1
Zenith Stromberg 175CD carburettor with automatic choke. Comprising service kit 212507 plus throttle disc and throttle spindle
Required: 1
for vehicles with Zenith Stromberg carburettors
Required: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Required: 1
