Floor and sill repair panels - Saloon
right hand - as genuine, 4 small noses
MK1/2 (1959 - 1969)
Required: 1
left hand - as genuine, 4 small noses
MK1/2 (1959 - 1969)
Required: 1
RH - aftermarket with 6 large noses
from MK3 on (1970-2000)
Required: 1
RH - genuine sill with 6 large noses
from MK3 on (1970-2000)
Required: 1
LH - aftermarket with 6 large noses
from MK3 on (1970-2000)
Required: 1
LH - genuine sill with 6 large noses
from MK3 on (1970-2000)
Required: 1
right hand, 4.5" wide, 6 large noses
MK3 on (1970 - 2000)
Required: 1
left hand, 4.5" wide, 6 large noses
MK3 on (1970 - 2000)
Required: 1
Outer sill - right hand, 4 small noses, 8" wide
MK1/2 (1959 - 1969)
Required: 1
Outer sill - left hand, 4 small noses, 8" wide
MK1/2 (1959 - 1969)
Required: 1
Outer sill - right hand, 6 large noses, 6" wide
MK3 on (1970 - 2000)
Required: 1
Outer sill - left hand, 6 large noses, 6" wide
MK3 on (1970 - 2000)
Required: 1
left hand - full length, not tailored
Required: 1
left hand - left hand, tailored, lenght to rear box
Required: 1
right hand - full lenght, not tailored
Required: 1
Inner sill - right hand, tailored, lenght to rear box
Required: 1
with crossmember extension - right hand
Required: 1
with crossmember extension - left hand
Required: 1
with nut - in sill front right and left - sill reinforcement and for slinging shoe fitting
Required: 2
with nut - in sill, RH rear
Required: 1
with nut - in sill, LH rear
Required: 1
for slinging shoe, rear, right hand
Required: 1
for slinging shoe, rear, left hand
Required: 1
for battery cable to floor - length: 121 cm
Required: 1
with inner and outer sills, crossmember, 'round' tunnel
MK1 Saloon with 'Magic Wand' gearchange (1960-67)
Required: 1
with inner and outer sills, crossmember, 'round' tunnel for remote control type gearchange only
Saloon MK2/3 and Cooper/Cooper S MK1-3
Required: 1
main, with inner sills, without outer sills, crossmember and heelboard, length 140 cms - idendification: round tunnel
1960 on approx to 1973
without cutting for gear stick, could be used for cars with 'Magic Wand type' gear change as well as for cars with 'Remote type' gear change
Required: 1
with inner and outer sills, crossmember and heelboard, length: 140 cms - identification: latest 1991 on rib design and 'square' tunnel
Saloon (1976-96)
Required: 1
with inner & outer sills, crossmember and heelboard, length: 140 cms - idendification: square tunnel
1996 on with seat belt pre-tensioners
identification: 'square' tunnel, latest 1991 om rib design
Required: 1
main, with inner sills, without outer sills, crossmember and heelboard, length 140 cms - genuine BMHT
1976 on
identification: 'square' tunnel, latest 1991 om rib design
Required: 1
assembly, front to rear, with inner & outer sills - right hand
MK1/2 (1959 - 1969)
identification: Outer sill with 4 small noses
Required: 1
assembly, front to rear, with inner & outer sills - left hand
MK1/2 (1959 - 1969)
identification: Outer sill with 4 small noses
Required: 1
RH, complete panel with inner sill and outer sill - identification: outer sill with 6 large noses
MK3, MK4 und MK5 carburettor models (1970-92)
Required: 1
LH, complete panel with inner sill and outer sill - identification: outer sill with 6 large noses
MK3, MK4 und MK5 carburettor models (1970-92)
Required: 1
RH front and rear, repair panel with inner sill only
MK3, MK4 und MK5 carburettor models (1970-92)
Required: 1
LH front and rear, repair panel with inner sill only
MK3, MK4 und MK5 carburettor models (1970-92)
Required: 1
as genuine - front to rear, with inner sill and outer sill - right hand
Injection cars from 1991 onwards (could also be used for earlier cars)
Required: 1
as genuine - front to rear, with inner sill and outer sill - left hand
Injection cars from 1991 onwards (could also be used for earlier cars)
Required: 1
front, right hand - repair panel
upto 1991 Injection cars
Required: 1
RH front - restauration quality
upto 1991 Injection cars
Required: 1
front, right hand - restoration quality
latest 1991 Injection cars on
Required: 1
genuine Rover - front, right hand
Required: 1
front, left hand - repair panel
upto 1991 Injection cars
Required: 1
LH front - restauration quality
upto 1991 Injection cars
Required: 1
front, left hand - restoration quality
latest 1991 Injection cars on
Required: 1
genuine Rover - front, left hand
Required: 1
Toeboard assembly, bulkhead to floor panel - for cars with solid mounted front subframe
Mk1-3 (1959-76)
Required: 1
Footwell toeboard, floor panel to bulkhead - cars with rubber mounted front subframe
1976 on - rubber mounted subframe
Required: 1
Footwell toeboard, floor panel to bulkhead - cars with rubber mounted front subframe
1976 on - rubber mounted subframe
Required: 1
for 'round' tunnel
upto introduction rod-change gearbox, saloon to 12/1972
Required: 1
for 'square' tunnel
rod-change type gearbox on, saloon 01/1973 on
Required: 1
Exhaust Tunnel front to rear, round type - cars with 'Magic Wand' gear shift
Saloon MK1 (1960-67)
Required: 1
Exhaust Tunnel front to rear, round type - cars with 'Remote-Control' gear shift
Saloon Mk1/2/3 (1961-72)
Required: 1
Exhaust Tunnel front to rear, square type - cars with 'Rodchange' gear shift
Saloon Mk3 on (1973-96)
Required: 1
Exhaust Tunnel front to rear, square type - cars with 'Rodchange' gear shift
Saloon Mk3 on (1973-96)
Required: 1
Exhaust Tunnel front to rear, square type with strengthening bracket for pre tensioned seat belts - cars with 'Rodchange' gear shift
Saloon (1997-2000)
Required: 1
rear subframe mount - right hand
part of heelboard
Required: 1
rear subframe mount - left hand
part of heelboard
Required: 1
Wheelarch, pocket filler panel to subframe fitting - right hand
Required: 1
Wheelarch, pocket filler panel to subframe fitting - left hand
Required: 1
rear companion box - right hand
Required: 1
rear companion box - left hand
Required: 1
rear right hand
MK1/2 (1959 - 1969)
Required: 1
rear left hand
MK1/2 (1959 - 1969)
Required: 1
RH - with inertia seat belt mount
1990 onwards, must be modified when using on earlier models
Required: 1
LH - with inertia seat belt mount
1990 onwards, must be modified when using on earlier models
Required: 1
complete with rear seat pan, including battery box
Mpi variant, also suitable for all earlier models (1959-2000)
Required: 1
Rear seat brace on floor & wheel arch - right hand
1967 onwards
Required: 1
Rear seat brace on floor & wheel arch - left hand
1967 onwards
Required: 1
boot floor part - rear, 10" wide
Required: 1
boot floor part - right hand
Required: 1
late type, without 'Roto-Dip' hole
Required: 1
spare wheel on boot floor
MK1 saloon
Required: 1
shock absorber mount in rear wheel arch
Required: 2
wheelarch and bootfloor - right hand
Required: 1
wheelarch and bootfloor - left hand
Required: 1
without fixing holes for rear fog lamp
Saloon (1959-80)
Required: 1
original type without fitting for rear fog lamp
Saloon (1959-80)
Required: 1
with fittings for rear fog lamp
Saloon (1980-2000)
Required: 1
original type with fittings for rear fog lamp
Saloon (1980-2000)
Required: 1
rear valance, inner - right hand
Required: 1
rear valance, inner - left hand
Required: 1
rear valance, inner, with subframe support - right hand
Required: 1
rear valance, inner, with subframe support - left hand
Required: 1
