Starter motor
M35G inertia drive SB type - rotation: clock wise, voltage: 12, drive: 9 teeth. Lucas no.'s: 25022, 25079. Reconditioned, in exchange
Required: 1
new item - M35G inertia drive SB type - rotation: clock wise, voltage: 12, drive: 9 teeth. Serial no.'s: 25022, 25079
Required: 1
M35J inertia drive SB type - rotation: clock wise, voltage: 12, drive: 10 teeth. Lucas no.'s: 25148, 25149, 25233. Reconditioned, in exchange
Marked with LU25149
Required: 1
M35J type inertia drive SB type replica. Rotation: clockwise, voltage: 12. May replace the Lucas starter motors 25148, 25149 and 25233
Marked with LU25149
Required: 1
original type with 9 teeth. Fixed by nut
Required: 1
original type with 9 teeth. Fixed by clip
Required: 1
with 10 teeth. Fixed by clip
Required: 1
starter pinion
Starter motor LU25022 and LU25079
Required: 1
starter pinion
Starter motor LU25149
Required: 1
pinion assembly
Starter motor LU25022
Required: 1
pinion assembly
Starter motor LU25079 and LU25149
Required: 1
drive end bracket
Starter motor LU25022
Required: 1
drive end bracket
Starter motor LU25079
Required: 1
drive end and commutator end bracket
Starter motor LU25149
Required: 1
Starter motor LU25022 and LU25079
Required: 1
Starter motor LU25149
Required: 1
for Lucas starter motor M35G
Starter motor LU25022 and LU25079
Required: 1
commutator end bracket - used on die cast end bracket
Starter motor LU25079 and LU25149
Required: 1
commutator end bracket - used on pressed steel end bracket
Starter motor LU25079 and LU25149
Required: 1
drive end and commutator end bracket
Starter motor LU25149
Required: 1
commutator end
Starter motor LU25149
Required: 1
through brackets
Required: 2
for brush tension - used on die-cast end plate
Starter motor LU25022 and LU25079
Required: 1
for Lucas starter motor M35G. Set of 4 - feature: quadrangular shape
Required: 1
for Lucas M35J type starter motor with following numbers: 25148, 25149 and 25233 - variant with triangular shape
Required: 1
Starter motor LU25022 and LU25079
Required: 1
Starter motor LU25149
Required: 1
for brush set holes
Starter motor LU25022 and LU25079
Required: 1
for band cover
Starter motor LU25022 and LU25079
Required: 1
for band cover
Starter motor LU25022 and LU25079
Required: 1
starter motor to engine plate
Required: 1
for adjusting starter motors with 127 mm hole spacing, height: 2 mm
starter motor. ST2 type with push button
MK3
Required: 1
starter motor - non push button type
MK4 and 1500
Required: 1
fitting starter solenoid
Starter solenoid to body
Required: 2
for terminal insulating on solenoid and starter motor
Required: 2
starter solenoid
Required: 1
power: 1.0 kW
Required: 1
