Gearbox, overdrive specification - inner
for ball bearings
Lithium based multipurpose grease
Required: 1
Content: 100 g (?24.80 / 1000 g)
between 1st gear and mainshaft bearing
Required: 1
1st speed gear
To chassis no. CF12500 and CR5000
Required: 1
1st speed gear
From chassis no. CF12501 and CR5001
Required: 1
1st speed - new item
To gearbox no. CD20281
Required: 1
1st speed - used item
To gearbox no. CD20281
Required: 1
1st speed
From gearbox no. CD20282 to CD21768
Required: 1
1st speed
From gearbox no. CD21769
Required: 1
1st and 2nd speed
To gearbox no. CD20281
Required: 1
1st and 2nd speed
From gearbox no. CD20282
Required: 1
sleeve - 1st and 2nd speed
Required: 1
under the synchro hub spring - thickness: 13 mm
1st speed gear - 0.118"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.121"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.124"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.126"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.127"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.13"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.132"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.138"
To chassis no. CF12500 and CR5000.
0.197 to 0.199"
From chassis no. CF12501 and CR5001
0.200 to 0.202"
From chassis no. CF12501 and CR5001
0.203 to 0.205"
From chassis no. CF12501 and CR5001
0.206 to 0.208"
From chassis no. CF12501 and CR5001
2nd speed
TR5 and TR250, TR6 to gearbox no. CD20281
Required: 1
2nd speed
From gearbox no. CD20282 to CD21768
Required: 1
2nd speed
TR6 from gearbox no. CD21769 to chassis no. CF12500 and CR5000
Required: 1
2nd speed
TR6 from chassis no. CF12501 and CR5001
Required: 1
2nd speed gear - original equipment
To chassis no. CF12500 and CR5000
Required: 1
2nd speed gear - uprated version
To chassis no. CF12500 and CR5000
Required: 1
2nd speed gear
From chassis no. CF12501 and CR5001
Required: 1
3rd speed gear
To chassis no. CF12500 and CR5000
Required: 1
3rd speed gear
From chassis no. CF12501 and CR5001
Required: 1
3rd and 4th speed
To gearbox no. CD20281
Required: 1
3rd and 4th speed
From gearbox no. CD20282
Required: 1
inner section - 3rd and 4th gear
From gearbox no. CD20282
Required: 1
Required: 1
Early cars with 'A' type overdrive to gearbox no. CD20281
Required: 1
Late cars with 'A' type overdrive from gearbox no. CD20282
Required: 1
All cars with 'J' type overdrive from chassis no. CF1 and CR567
Required: 1
mainshaft - shelled type
To gearbox no. CD20281
Required: 1
mainshaft - open cage type
From gearbox no. CD20282
Required: 1
contains first motion shaft and constant gear
To gearbox no. CD20281
Required: 1
From gearbox no. CD20282 to CD21768
Required: 1
From gearbox no. CD21769
Required: 1
closed cage type with 27.01 to 27.02 mm outer diameter. Please note: this bearing must be heat shrining to the 1st motion shaft
Required: 2
for open cage needle bearing
Required: 2
shell type - original equipment
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Required: 2
shelled type - reproduction
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Required: 2
with 16 teeth - complete unit including 1st gear and reverse gear
To chassis no. CF12500 and CR5000
Required: 1
with 1st and reverse gear. Feature: 17 teeth
From chassis no. CF12501 and CR5001
Required: 1
2nd speed - on lay shaft
To gearbox no. CD30646
Required: 1
2nd speed - on lay shaft
From gearbox no. CD30647
Required: 1
3rd speed gear - on lay shaft
Required: 1
constant mesh 4th speed
To gearbox no. CD20281.
This part is only available in kit 1816 (ill. 33)
Required: 1
constant mesh 4th speed
From gearbox no. CD20282 to CD21768
Required: 1
constant mesh 4th speed - identified by 35 external teeth
From gearbox no. CD21769
Required: 1
lay shaft and reverse gear shaft
Required: 1
Content: 100 g (?24.80 / 1000 g)
