Cylinder block
cylinder head - length 9"
TR2 to engine no. TS13051E - cars with ' low port' cylinder head
Required: 4
cylinder head - length 5"
TR2 to engine no. TS13051E - cars with ' low port' cylinder head
Required: 6
cylinder head - length: 5"
TR2 from engine no. TS13052, TR3 to TR4A - cars with 'high port' cylinder head
Required: 3
cylinder head - length: 5.3/8". All engines without lifting bracket
TR2 from engine no. TS13052E plus ll TR3, TR3A, TR3B, TR4 and TR4A (1956-67) - feature: vehicles with 'high port' cylinder head
Required: 1
cylinder head - length: 5.9/16". Fits to all engines with lifting bracket
TR2 from engine no. TS13052E plus ll TR3, TR3A, TR3B, TR4 and TR4A (1956-67) - feature: vehicles with 'high port' cylinder head
Required: 1
cylinder head - length: 5.3/8"
TR2 from engine no. TS13052E plus ll TR3, TR3A, TR3B, TR4 and TR4A (1956-67) - feature: vehicles with 'high port' cylinder head
Required: 2
cylinder head - length 9"
TR2 from engine no. TS13052, TR3 to TR4A - cars with 'high port' cylinder head
Required: 2
cylinder head - length 9.1/2"
TR2 from engine no. TS13052E plus ll TR3, TR3A, TR3B, TR4 and TR4A (1956-67) - feature: vehicles with 'high port' cylinder head
Required: 2
front
Required: 1
1.1/2" x 5/16" UNF
Lifting eye to engine plate
Required: 2
oil gallery - supplied in a stick of 4
Required: 1
front - leightweight alloy replacement
TR2, TR3, TR3A and TR3B
Required: 1
front - leightweight alloy replacement
TR4 and TR4A
Required: 1
distributor and tachometer drive housing
Required: 1
Distributor, tachometer drive housing and fuel pump attachment
Required: 4
Distributor, tachometer drive housing and fuel pump attachment
Required: 4
Distributor, tachometer drive housing and fuel pump attachment
Required: 4
oil gallery
Required: 1
new item
TR2 to TR3A, TR4 to engine no.CT25393E
Required: 1
used item
TR2 to TR3A, TR4 to engine no.CT25393E
Required: 1
breather pipe
Required: 1
for engines with closed circuit breathing
TR4 from engine no. CT23594E, TR4A
Required: 1
original brass type - 1/2"-20 UNF thread
Required: 1
crankshaft rear - 2 pieces
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (?125.12 / 1000 ml)
crankshaft rear. Please note: crankshaft flange must be turned down to 63.5 mm
Required: 1
for fitting the rear crankshaft oil seal on conversion kit
Required: 1
