Clutch control MKII
for release arm return spring
Required: 1
fixing clutch housing to cylinder block
9 required on early models.Quote engine no.
Required: 8
on bolts above
9 required to early models. Quote engine no.
Required: 8
- timing aperture at bottom of clutch housing
Required: 1
clutch housing support - R/H
Required: 1
clutch housing support - L/H
Required: 1
fixing support brackets to cylinder block
5/16¡° UNF
Required: 4
fixing support brackets to clutch housing
Required: 4
fixing support brackets to cylinder block
3/8" UNF
Required: 2
Required: 1
clutch master cylinder - identified by no external identification rings on the barrel of the cylinder end and a conical inner spring. Content: cup type main seal, ring seal and dust cover
Required: 1
for mounting clutch master cylinder to top of housing
Required: 2
identified by 80 mm length
MK II 3.4 to engine no. KJ7658 and all cars with KG and with KH engine no., MKII 3.8 to engine no. LE2532 and all cars with LA, LB and with LC engine no.
Required: 1
identified by 95 mm length
2.4/3.4/3 Intermediate models. Early 340 Quote. Engine no.
Required: 1
reproduction with 95 mm length
Later 340 models. Quote engine no.
Required: 1
clutch slave cylinder
Repairs slave cylinder SJ6026 and SJ6027
Required: 1
clutch slave cylinder
Repairs slave cylinder SJ6031
Required: 1
clutch slave cylinder
Early models only
Required: 1
clutch pedal
Required: 2
two piece kit for LHD models
LHD models
Required: 1
two piece kit for RHD models
RHD models
Required: 1
for vehicles with Moss Box - new item
2.4 to 119199 and 127821, 3.4 to 169340 and 180187, 3.8 to 234124 and 224149 (1959-65)
Required: 1
clutch master cylinder. Plastic replacement
Required: 1
