Steering wheels, draught excluder, door handles
window winder handle and interior door handle
Required: 8
RH front
Required: 1
LH front
Required: 1
RH rear door
Required: 1
LH rear
Required: 1
less knob
Required: 2
securing front quarter light upper pivot hinge to frame
Required: 4
rear quarter light vent catch
Required: 4
rear quarter light vent catch to frame
Required: 10
securing frame to quarter vent tie plate
Required: 4
Mark 3 with 3 polished and perforated spokes and visible rivets, 15" flat
Required: 1
Mark 9 Mahogany with 3 polished and perforated spokes. No visible alloy steering ring and rivets, 15" dished
Required: 1
E-Type style with 3 polished and perforated spokes, 16" flat
Required: 1
E-Type style with 3 polished and perforated spokes, 15" flat
Required: 1
for genuine E-Type steering wheels 202115, 307099, 317926, 500117, 500128
Required: 1
for original Mark II steering wheel
Required: 1
for original Mark II steering wheel
Required: 1
horn ring in black - comes with badge
Mark II (1959-64): 3.4 to chassis no. 164123 and 179463, 3.8 to chassis no. 231289 and 223055
Required: 1
horn ring in black - comes less badge
Mark II (1964-69): 3.4 from chassis no. 164402 and 179499, 3.8 from chassis no. 231586 and 223125 plus all 240 and 340 models
Required: 1
for non overdrive cars only
Cars fitted with Moss gearbox
Required: 1
securing gear knob
Cars fitted with Moss gearbox
Required: 1
for models with all synchromesh gearbox
Required: 1
for models with all synchromesh gearbox. Black leather replacement, with 'Jaguar head' badge
Required: 1
gear knob
Cars with all synchromesh gearbox
Required: 1
gear lever gaiter
Required: 1
with stem and chrome finish back - dimensions: 205 x 60 mm. Mirror with manual dipping function
Required: 1
brake and clutch pedal - variant with 'J' for Jaguar
Cars with manual transmission
Required: 2
brake pedal - variant with 'J' for Jaguar
Cars with automatic transmission
Required: 1
accelerator pedal - identify by 10" length
Cars with organ type pedal
Required: 1
accelerator pedal - variant with 'J' for Jaguar
Cars with pendant type pedal
Required: 1
on headlamp dip switch
All 2.4/3.4/3.8. Early 240/340.
Quote chassis no.
Required: 1
on headlamp dip switch
Later 240/340
Quote chassis no.
Required: 1
cushioning lid of fold-down table at back of seats
Required: 4
securing grommet to seat back
Required: 4
adhesive, for tax disc, on windscreen (inner side) - 'Jaguar' black/gold
Required: 1
polished stainless steel. Supplied in sets of 4
Required: 1
2-piece set in black for LH and RH side
Required: 1
black. Rubber tube covered with 100% wool pile. Tack on flange. Diameter: 9/16", flange: 3/4"
Required: 13
red. Rubber tube covered with 100% wool pile. Tack on flange. Diameter: 9/16", flange: 3/4"
Required: 13
navy. Rubber tube covered with 100% wool pile. Tack on flange. Diameter: 9/16", flange: 3/4"
Required: 13
grass green. Rubber tube covered with 100% wool pile. Tack on flange. Diameter: 9/16", flange: 3/4"
Required: 13
beige. Rubber tube covered with 100% wool pile. Tack on flange. Diameter: 9/16", flange: 3/4"
Required: 13
Derrington with 3 polished spokes, 16" flat
Required: 1
for use with Derrington steering wheel 204354
Required: 1
Static lap and diagonal type, modern belt buckle and cable stalk for one front seat retractor with adjustable angle, no pillar loop length of cable stalk: 30 cm webbing length: 270 cm fitting material included black, narrow streaks (colour code: FC001)
Required: 2
Static lap and diagonal type, modern belt buckle and cable stalk for one front seat length of bottom anchor plate: 5 cm length of cable stalk: 15 cm standard plates for top and bottom anchor point webbing length: 220 cm fitting material included black, narrow streaks (colour code: FC001)
Required: 2
for one seat belt fixing point. This kit contains all brackets, fixings and instructions for easy installation. Size: 105 x 85 mm
Required: 2
Automatic lap and diagonal type, period style chrome buckle for both front seats chrome buckle with Jaguar logo vertically mounted retractor, no pillar loop length of bottom anchor plate: 5 cm webbing length: 300 cm fitting material included
Required: 1
for two seats. Static lap type with period style chrome buckle, webbing length: 150 cm. Colour: black with narrow streaks (XY035)
Required: 1
for two seats. Static lap type with period style chrome buckle, webbing length: 150 cm. Colour: grey with fine texture (XY042)
Required: 1
in grey. 5 loop wool kit (union cloth) including material to recover the flush-fitting sun visors
Mark II to November 1960: 2.4 to 103554 (RHD) and 125695 (LHD), 3.4 to 152207 (RHD) and 175989 (LHD), 3.8 to 201732 (RHD) and 230000 (LHD)
Required: 1
in beige. 5 loop wool kit (union cloth) including material to recover the flush-fitting sun visors
Mark II to November 1960: 2.4 to 103554 (RHD) and 125695 (LHD), 3.4 to 152207 (RHD) and 175989 (LHD), 3.8 to 201732 (RHD) and 230000 (LHD)
Required: 1
in grey. 6 loop wool kit (union cloth) including material to recover the revised 'flexible' sun visors
Mark II from November 1960 onwards: 2.4 from 103555 (RHD) and 125696 (LHD), 3.4 from 152208 (RHD) and 175990 (LHD), 3.8 from 201733 (RHD) and 230001 (LHD)
Required: 1
in beige. 6 loop wool kit (union cloth) including material to recover the revised 'flexible' sun visors
Mark II from November 1960 onwards: 2.4 from 103555 (RHD) and 125696 (LHD), 3.4 from 152208 (RHD) and 175990 (LHD), 3.8 from 201733 (RHD) and 230001 (LHD)
Required: 1
seat base - 2 piece kit for both front seats
Required: 1
seat back - 2 piece kit for both front seats
Required: 1
seat back for rear seat - 2-piece set
Required: 1
made of bright red leather
Required: 1
