Gearbox, non overdrive specification - outer
non overdrive type - reconditioned, in exchange
Required: 1
Required: 1
first motion shaft - sleeve length: 2"
Required: 1
Starter motor to gearbox casing
Required: 2
Clutch slave cylinder bracket to gearbox casing
Required: 2
Clutch slave cylinder bracket to gearbox casing
Required: 2
Clutch slave cylinder bracket to gearbox casing
Required: 2
with alignment dowel
Gearbox to engine backplate
Required: 2
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Required: 1
oil drain and oil filler - magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Alternatives
Required: 1
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Alternatives
Required: 1
rear extension
Required: 1
Rear extension to gearbox casing
Required: 6
- length: 1"
Rear extension to gearbox casing
Required: 5
- length: 2"
Rear extension to gearbox casing
Required: 1
speedo drive - identified by 15 teeth
All gearboxes with CC and CD prefixes
Required: 1
speedo drive - identify by 17 teeth
All gearboxes with CF prefix
Required: 1
speedometer pinion to rear gearbox extension
Required: 1
Speedometer pinion to rear extension
Required: 1
speedometer pinion to rear extension
Required: 1
OE style covered with black imitation leather
Required: 1
black leather, with 'Triumph' badge
Required: 1
locating gear lever
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Required: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Required: 1
gear lever. Feature: 3 attachment holes
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Required: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Required: 1
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Required: 1
gear lever
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Required: 1
gear lever retainer
TR5/250, TR6 Carburettor to CC85737, TR6 P.I. to CP77718
Required: 1
locating gear lever
TR6 Carburettor from CF1, TR6 P.I. from CR1
Required: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Required: 1
gear lever. Feature: bayonet type
TR6 Carburettor from CF1, TR6 P.I. from CR1
Required: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Required: 1
TR6 Carburettor from CF1, TR6 P.I. from CR1
Required: 1
gear lever
TR6 Carburettor from CF1, TR6 P.I. from CR1
Required: 1
gear lever retainer
TR6 Carburettor from CF1, TR6 P.I. from CR1
Required: 1
made of black imitation leather
Required: 1
universal replacement, bare
Required: 1
- length: 3"
Remote control housing to casing
Required: 2
- length: 2.3/4"
Remote control housing to casing
Required: 2
- length: 15/16"
Remote control housing to casing
Required: 4
LH and RH of control remote housing
Required: 2
1st and 2nd speed
Required: 1
1st and 2nd speed
Required: 1
3rd and 4th speed
Required: 1
for shaft reverse selector fork
Required: 1
reverse speed
To gearbox no. CC75000
Required: 1
reverse speed
From gearbox no. CC75001
Required: 1
reverse speed
To gearbox no. CC10960
Required: 1
reverse speed
From gearbox no. CC10961
Required: 1
Detent selector shaft on 1st to 4th speed
Required: 4
Detent selector shaft on 1st to 4th speed
Required: 2
Detent selector shaft on 1st to 4th speed
Required: 2
Detent selector shaft on 1st to 4th speed
Required: 2
selector shaft 3rd and 4th speed
Required: 1
Detent reverse selector shaft
Required: 1
Detent reverse selector shaft
Required: 1
500 ml spray bottle
Required: 1
Content: 500 ml (?19.90 / 1000 ml)
