Radiator - TR5/250, TR6 Carburettor to May 1975, all TR6 P.I.
new item with high performance extra cooled core
Required: 1
radiator - 7 PSI, 3/4" depth
TR5/250, TR6 Carburettor to CC67893, TR6 P.I. to CP54584
Required: 1
radiator - 13 PSI, 3/4" depth
TR6 Carburettor from CC75001, TR6 P.I. from CP75001 and also all models fitted with our radiator 315405
Required: 1
top hose between radiator and thermostat housing
TR5 and TR250 (1967-68) ? TR6 Carburettor models to 1972 (to chassis no. CC67893), all TR6 P.I. models (1968-75)
Required: 1
top hose between radiator and thermostat housing - covered with green fabric
TR5 and TR250 (1967-68) ? TR6 Carburettor models to 1972 (to chassis no. CC67893), all TR6 P.I. models (1968-75)
Required: 1
top radiator hose
TR5 and TR250 (1967-68) ? TR6 Carburettor models to 1972 (to chassis no. CC67893), all TR6 P.I. models (1968-75)
Required: 2
top - to thermostat cover
TR6 Carburettor from CC75001
Required: 1
for thermo vacuum switch
TR6 Carburettor from CC75001
Required: 1
TR6 Carburettor from CC75001
Required: 1
top - to radiator
TR6 Carburettor from CC75001
Required: 1
top radiator hoses
TR6 Carburettor from CC75001
Required: 4
between water pipe and water pump housing
Required: 1
between water pipe and water pump housing - covered with green fabric
Required: 1
between water pump and radiator. Stainless steel variant
TR5 and TR250 (1967-68) plus TR6 to August 1971: Carburettor models to CC67893, P.I. models to CP54584
Required: 1
between water pump and radiator. Stainless steel variant
TR6 from August 1971: Carburettor models from CC75001, P.I. models from CP75001
Required: 1
bottom hose between radiator and water pipe
Required: 1
bottom hose between radiator and water pipe - covered with green fabric
Required: 1
between water pump and radiator. Stainless steel variant with hole to adapt thermo switch for electric fan control
May replace original water pipe 3106 (ill. 11)
Required: 1
for mounting in the water pipe. Switches on at 82 C¡ã and off at 68 C¡ã
For electric fan control. Use with water pipe 25779 (ill. 14)
Required: 1
for mounting in the water pipe. Switches on at 86 C¡ã and off at 76 C¡ã
For electric fan control. Use with water pipe 25779 (ill. 14)
Required: 1
for mounting in the water pipe. Switches on at 86 C¡ã and off at 81 C¡ã
For electric fan control. Use with water pipe 25779 (ill. 14)
Required: 1
for mounting in the water pipe. Switches on at 88 C¡ã and off at 79 C¡ã
For electric fan control. Use with water pipe 25779 (ill. 14)
Required: 1
for mounting in the water pipe. Switches on at 92 C¡ã and off at 87 C¡ã
For electric fan control. Use with water pipe 25779 (ill. 14)
Required: 1
wing type made from brass - with 9/16" BSP thread
Required: 1
fiberboard, wheel arch to radiator - set of two for RH and LH side
TR5/250
Required: 2
mudshield
TR5/250
Required: 8
No.10 with 5/8" length - galvanised screw with Phillips PZ2 cross slotted panhead
TR6 P.I.
Required: 2
air duct panel to LH wheel arch
TR6 P.I.
Required: 1
air duct panel to RH wheel arch
TR6 P.I.
Required: 1
air duct panel and stay to front valance
TR6 P.I.
Required: 2
air duct panel to air cleaner
TR6 P.I.
Required: 1
air duct panel
TR6 Carburettor
Required: 1
No.10 with 5/8" length - galvanised screw with Phillips PZ2 cross slotted panhead
TR6 Carburettor
Required: 2
air duct panel to LH wheel arch
TR6 Carburettor
Required: 1
air duct panel to RH wheel arch
TR6 Carburettor
Required: 1
air duct panel and stay to front valance
TR6 Carburettor
Required: 2
Kevlar reinforced. Set with 7 lines incl. heater hoses
TR5/250, TR6 to Carburettor CC67893, all TR6 P.I.
Required: 1
Kevlar reinforced. Set with 8 lines incl. heater hoses
TR6 Carburettor from CC75001
Required: 1
super coolant
Required: 1
Content: 355 ml (?52.08 / 1000 ml)
