Oil sump - XK150
with special connections for the original oil pickup pipes on 3.4 and 3.8 XK6 engines
Required: 1
original type - reconditioned, in exchange
Required: 1
assembly
May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 3)
Required: 1
assembly. High quality aftermarket product
May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 3)
Required: 1
oil suction pipe
Required to fit oil suction pipe to our high output oil pumps 480724 and 3988 (ill. 2)
Required: 1
oil pump
Required: 1
on oil pump - supporting suction pipe
Required: 1
oil pump
Required: 1
suction pipe to bearing cap
Required: 1
oil suction pipe
Required: 1
oil suction pipe
Required: 1
- length: 14.5"
To engine no.s V5059 and VS1303
Required: 1
length: 20.5"
From engine no.s V5060 and VS1304 also from VA1001 and VAS1001
Required: 1
crankshaft rear
To engine no.s V7459, VS2182, VA1398 and VAS1084
Required: 1
crankshaft rear - made from rubber
From engine no. V7460, VS2183, VA1399 and VAS1085
Required: 1
crankshaft rear - modern high tech version
XK150 from engine no. V7460, VS2183, VA1399 and VAS1085
Required: 1
oil drain - brass
Alternatives
Required: 1
Required: 1
Securing timing pinter to sump
Required: 2
Securing oil sump to cylinder block
Required: 26
3/4" x 5/16" UNF
Securing oil sump to cylinder block
Required: 25
- length: 5/8"
Securing oil sump to cylinder block
Required: 1
Securing strainer to oil sump
Required: 6
oil filter to oil return pipe - length: 15 cm
Required: 1
- oil filter to oil sump
Required: 1
Securing oil return pipe to sump
Required: 2
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (?125.12 / 1000 ml)
