Rear leaf spring and shock absorber
rear, driver side only - feature: 11 leafs
88" Series II, IIA and III (1958-85)
Required: 1
rear axle, passenger side - feature: 11 leafs
88" Series II, IIA and III (1958-85)
Required: 1
rear axle, driver side - feature: 10 leafs
109" Series II, IIA and III (1958-85) 4, 6 and 8 cylinder models except 109" One-Ton
Required: 1
rear axle, passenger side - feature: 10 leafs
109" Series II, IIA and III (1958-85) 4, 6 and 8 cylinder models except 109" One-Ton
Required: 1
rear axle - feature: 9 leafs
109¡å One-Ton Series IIA and III (1968-77)
Required: 1
LH leaf spring, rear suspension
88" Series II and IIA, Series III to vehicle suffix 'C'
Required: 1
RH leaf spring, rear suspension
88" Series II and IIA, Series III to vehicle suffix 'C'
Required: 1
road spring
Serie II, IIA 109 models with Rover axle
Required: 2
road spring
Serie II, IIA 109er models with ENV axle
Required: 2
LH rear leaf spring
Series III except 3.5 V8 models from vehicle suffix 'D' and axle suffix 'E' (1977-85)
Required: 1
RH rear leaf spring
Series III except 3.5 V8 models from vehicle suffix 'D' and axle suffix 'E' (1977-85)
Required: 1
road spring
All Serie III 109 models
Required: 2
rear leaf spring - feature: imperial threads
Serie II and IIA with Rover axle (1958-71) plus Serie III 88" to vehicles suffix 'C' (1971-77)
Required: 4
rear leaf spring - feature: imperial threads
Series II and IIA 109" with ENV axle (1958-71)
Required: 4
rear leaf spring - feature: metric threads
Series III 88" with Rover axle and vehicle suffix 'D' (1977-78)
Required: 4
rear leaf spring - feature: metric threads
Series III 88" with Rover axle from vehicle suffix 'E' onwards (1978-85)
Required: 4
rear leaf spring - feature: metric threads
Series III 109" except 1-Ton models with Salisbury axle (1971-85)
Required: 4
rear leaf spring - feature: metric threads
Series III 109" 1-Ton models with Salisbury axle (1971-77)
Required: 4
with imperial thread
Series II and IIA (1958-71) plus Series III to vehicle suffix 'C' (1971-77)
Required: 8
with metric thread
Series III from suffix 'D' onwards (1977-85)
Required: 8
retaining road spring, rear position
Serie II, IIA to suffix "A"
Required: 4
retaining road spring, rear position
Serie IIA from vehicle suffix "B"
Required: 4
retaining road spring, rear position
Serie III
Required: 4
Serie IIA from suffix "B" and Serie III
Required: 4
- tapped side
Serie II and IIA 88 to suffix "A"
Required: 2
- tapped side
Serie IIA from suffix "B" and Serie III 88 models
Required: 2
- tapped side
Serie II, IIA 109 to suffix "A"
Required: 2
- tapped side
Serie IIA from suffix "B" and Serie III 109 models
Required: 2
- plain side
Serie II, IIA und III 88 models
Required: 2
- plain side
Serie II, IIA and III 109 models
Required: 2
leaf spring, front fixing - identified by 1/2" BSF thread
Series II and IIA to vehicle suffix 'A' (1958-63)
Required: 2
leaf spring, front fixing - identified by 9/16" UNF thread
Series IIA from vehicle suffix 'B' and all Series III (1963-85)
Required: 2
Serie IIA from suffix "B" and Serie III
Required: 2
brake pipe over rear axle, RH side
Required: 1
brake pipe over rear axle, LH side
Required: 1
road spring
Serie III Germany only
Required: 2
rear
Serie II, IIA and III 88 models
Required: 2
rear shock absorber
Serie II, IIA and III 88" models
Required: 8
rear shock absorber
Series II, IIA and III 88" models
Required: 8
retaining shock absorber - upper position
Serie II, IIA and III 88 models
Required: 2
retaining shock absorber - upper position
Serie II, IIA and III 88 models
Required: 2
retaining shock absorber - upper position
Serie II, IIA and III 88 models
Required: 2
retaining shock absorber - lower position
Serie II, IIA and III 88 models
Required: 2
retaining shock absorber - lower position
Serie II, IIA and III 88 models
Required: 2
rear
Serie II, IIA and III 109 models, except 1 Ton
Required: 2
rear axle
109 1-Ton Series IIA and III (1968-77)
Required: 2
rear shock absorber - upper
Serie II, IIA and III 109" models
Required: 4
rear shock absorber - upper
Series II, IIA and III 109" models
Required: 4
retaining shock absorber - upper position
Serie II, IIA and III 109 models
Required: 2
retaining shock absorber - upper position
Serie II, IIA and III 109 models
Required: 2
retaining shock absorber - upper position
Serie II, IIA and III 109 models
Required: 2
rear shock absorber - lower
Serie II, IIA and III 109 models
Required: 4
rear shock absorber - lower, outer
Serie II, IIA and III 109 models
Required: 4
shock absorber - cupped washer with 39.3 mm outer diameter
Serie II, IIA and III 109 models
Required: 4
retainig shock absorber - lower position
Serie II, IIA and III 109 models
Required: 2
