SU-HS2 Carburettors - Sprite II to IV and Midget I to III (1961-74)
HS2 type - new items with reference no. AUC990. Characteristic: fixed metering needle, no overflow pipe
948 cc models with 9CG engines: Sprite from HAN6-101 to HAN6-24731, Midget to GAN1-16183 (1961-62)
Required: 1
HS2 type - new items with reference no. AUD73. Characteristic: fixed metering needle, no overflow pipe
1098 cc models with 10CG engines: Sprite from HAN7-24732 to HAN7-38828, Midget from GAN2-16184 to GAN2-25787 (1962-64)
Required: 1
HS2 type - new items with reference no. AUD136. Characteristic: fixed metering needle, no overflow pipe
1098 cc and 1275 cc models with 10CC and 12CC engines: Sprite from HAN8-38829 to HAN9-85286, Midget from GAN3-25788 to GAN4-74885 (1964-69)
Required: 1
HS2 type - new items with reference no. AUD327. Characteristic: fixed metering needle and overflow pipe
1275 cc models with 12CE and 12V586F engines: Sprite from HAN10-85287, Midget from GAN5-74886 to GAN5-123644 (1969-72)
Required: 1
HS2 type - new items with reference no. AUD502. Characteristic: spring loaded metering needle and overflow pipe
1275 cc models with 12V588F engines: Midget from GAN5-123731 to GAN5-138753 (1972-73)
Required: 1
HS2 type - new items with reference no. AUD662. Characteristic: spring loaded metering needle and overflow pipe
1275 cc models with 12V-778F engines from August 1973 to October 1974 - Midget from GAN5-138801 to GAN5-153920
Required: 1
HS2 type. Complete kit comprising 20¡ã down draught inlet manifold, heat shield and interconnecting linkage
models with 948 cc, 1098 cc and 1275 cc enignes (1958-74)
Required: 1
front carburettor
Required: 1
rear carburettor
Required: 1
front carburettor. Feature: connector for breather hose
Required: 1
rear carburettor. Feature: no connector for breather hose
Required: 1
for heat shield on SU-HS2 carburettors - front mounting
Required: 1
for heat shield on SU-HS2 carburettors
Required: 1
with vent and black hexagonal plastic head - length of the rod: 2.125"
not for carburettors 311374
Required: 2
with vent and hexagonal black plastic head - length of the rod: 2.125"
1275 cc models with SU-HS2 carburettors with reference no. AUD662 from August 1973 to October 1974 - Midget from GAN5-138801 to GAN5-153920
Required: 2
with vent and hexagonal brass head - length of the rod: 2.125"
1275 cc models with SU-HS2 carburettors with reference no. AUD662 from August 1973 to October 1974 - Midget from GAN5-138801 to GAN5-153920
Required: 2
for spring loaded metering needles on SU-HS2 carburettors 20955 and 311374
1275 cc models with 12V-588F and 12V-778F engines: Midget from GAN5-123731 to GAN5-153920 (1972-74)
Required: 2
for fixed metering needles on SU-HS2 carburettors 6396, 6424, 311370 and 311371
Required: 2
spring loaded type for SU-HS2 carburettors - marked: AAC
Midget from GAN5-123731 to GAN5-153920 with carbrettors marked AUD502 or AUD662 (1972-74)
Required: 2
spring loaded type for SU-HS2 carburettors - marked: ABC
Midget from GAN5-123731 to GAN5-153920 with carbrettors marked AUD502 or AUD662 (1972-74)
Required: 2
fixed type for SU carburettors - marked: GY
with 10CG engines: Sprite from HAN7-24732 to HAN7-38828, Midget from GAN2-16184 to GAN2-25787 (1962-64)
Required: 2
fixed type - marked: AN, for weak mixture
for 10CC and 12CC engines fitted with SU-HS2 carburettors 311370 and 311371
Required: 2
fixed type. For weak mixture - marked: GX
948 cc. models with 9CG engine and and AUC990 SU carburettors
Required: 2
fixed type. For standard mixture - marked: V3
948 cc. models with 9CG engine and and AUC990 SU carburettors
Required: 2
fixed type - marked: H6, for rich mixture
Required: 2
fixed type. For rich mixture - marked: V2
948 cc. models with 9CG engine and and AUC990 SU carburettors
Required: 2
for SU-HS2 carburettors - supplied with float
Required: 1
for SU carburettors - bore: 0.070"
Required: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Required: 2
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Required: 2
front SU-HS2 carburettor
Required: 1
rear SU-HS2 carburettor
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU HS2 carburettors with 5/16" throttle spindle
Required: 4
throttle spindle on front and rear carburettor - stainless steel reproduction
Required: 2
and link
Required: 1
and link, front carburettor
Required: 1
front carburettor - supplied in pairs
Required: 1
rear carburettor - supplied in pairs
Required: 1
choke - front SU-HS2 carburettor 20955 and 311374
1275 cc models with 12V588F and 12V-778F engines: Midget from GAN5-123731 to GAN5-153920 (1972-74)
Required: 1
choke - rear SU-HS2 carburettor 20955 and 311374
1275 cc models with 12V588F and 12V-778F engines: Midget from GAN5-123731 to GAN5-153920 (1972-74)
Required: 1
Required: 2
with 3/8"-26 BSB coarse threat - for SU-HS carburettors with fixed metering needle
948 cc models with 9CG engines and SU-HS2 carburettors AUC990, all 1098 cc models plus 1275 cc models with 12CC engines and SU-HS2 carburettors AUD136 and AUD327
Required: 2
with 3/8"-40 UNS fine threat - SU-HS carburettors with spring loaded metering needle
Midget 1275 from GAN5-123731 to GAN5-153920 with SU-HS2 carbrettors marked AUD502 or AUD662 (1972-74) and Midget 1500 Europeen models with SU-HS4 carburettors with reference no. AUD665 (1974-76)
Required: 2
for mixture adjusting on main jet - variant with 3/8"-26 BSB coarse threat
Required: 2
rear carburettor - diameter: 0.090". Identification: pink marking sleeve
Required: 1
rear carburettor - Diameter: 0.090". Identification: green marking sleeve
Required: 1
Required: 2
control valve to inlet manifold
all models with 1098 cc engines (1962-66) plus models with 1275 cc engines (1966 to mid of 1968)
Required: 1
for SU-HS2 carburettors - new item with 20¡ã
from May 1961 to October 1974 with 948 cc, 1098 cc and 1275 cc engines - Sprite from HAN6-101 to AAN10-87824, Midget from GAN1-101 to GAN5-153920
Required: 1
for SU-HS2 carburettors - new item with connection for engine breathing system
948 cc and 1098 cc models, 1275 cc models to Mid 1968
Required: 1
for SU-HS2 carburettors, used item - characterristic: no adaptor for engine breathing system
1275 cc models from Mid 1968
Required: 1
for SU-HS2 carburettors - stainless steel variant
Required: 1
for SU and Zenith Stromberg carburettor from 1950
Required: 1
Content: 125 ml (?60.48 / 1000 ml)
for one SU-HS2 type carburettor
Required: 2
services one SU-HS type carburettor
Required: 2
for two SU-HS2 type carburtettors
Required: 1
for two SU-HS2 type carburtettors. Comprising service kit 200208 plus throttle discs and throttle spindles
Required: 1
complete - throttle and choke connector and levers
Required: 1
highly active special carburettor cleaner for all carburettor systems of 2- and 4-stroke engines
Required: 1
Content: 400 ml (?25.00 / 1000 ml)
