91黑料网

?5.11

Product number: 211920

Locking nut

?3.86

Product number: 361643

?3.78

Product number: 211921

wheel bearing

?6.84

Product number: 211922

Series II, IIA and III (1958-85) ? Defender to VIN...KA930455 (1983-93)

Classic - front suspension (1970-96), models with rear coil spring suspension to axle no. 35S16958B and models with rear air supension to axle no. 37S00315A

With securing edge

?1.88

Product number: 359987

Axle stud

?3.38

Product number: 360126

Anlaufscheibe
Thrust washer
Rondelle de friction
Tarcza dystanso

differential flange

?9.89

Product number: 368451

Series II, IIA und III with Rover axles (1958-85) ? Defender to VIN...LA930455 (1983-93)

Classic (1970-96)

differential flange

?5.17

Product number: 485894

Defender from VIN...LA930456 (1993-2006)

Halteklammer
Retaining clamp
Bride de blocage
Klamra
Unión de l

Mounting strap

anti roll bar bush

?15.80

Product number: 361193

Defender (1983-2006)

Classic (1970-96)

Needle bearing

in stub axle shaft

?37.87

Product number: 346988

Classic from VIN...GA399973 (1989-96)

Defender from VIN...LA930456 (1993-2006)

Nut

with M12 x 1.75 standard slope, total height: 6.8 mm - spanner size: 19 mm

?1.38

Product number: 361272

Nut

5/16" UNF - total height: 17/64", spanner size: 1/2" AF

?1.02

Product number: 25865

Nut

?0.43

Product number: 2303

M10 x 1.5 (standard slope), spanner size: 17 mm

?0.85

Product number: 204134

5/8" UNC - spanner size: 15/16 AF

?1.58

Product number: 211742

with M14 x 2.0 standard slope - total height: 14 mm, spanner size: 22 mm, high tensile grade: 8

?1.64

Product number: 211751

Sicherungsmutter
Locking nut
Ecrou d'arrêt
Tuerca de aseguramie

self locking hexagonal nut with polyamide clamping part and M20 x 2,5 standard slope - total height: 22 mm, spanner size: 30 mm, high tensile grade: 8

?3.56

Product number: 361280

with polyamide clamping part and 3/8" UNF thread - total height: 7/16", spanner size: 9/16" AF, high tensile grade: 8

?0.41

Product number: 2829

with polyamide clamping part and M8 x 1.25 standard slope - total height: 8 mm, spanner size: 13 mm, high tensile grade: 8

?0.40

Product number: 2944

with polyamide clamping part and 1/2" UNF thread - total height: 19/32", spanner size: 3/4" AF, high tensile grade: 8

?1.06

Product number: 3784

5/8" UNF, total height: 3/4" - spanner size: 15/16" AF

gearbox and stub axle housing

?2.21

Product number: 3785

Oil filler plug

swivel pin bearing housing - inner seal with 30 mm inner diameter

?8.51

Product number: 486677

Series II and IIA to gearbox suffix 'A' (1958-62) ? Defender (1983-2006)

Oil seal

front and rear wheel bearing - identified by 12.5 mm total height

?18.88

Product number: 211913

Defender to VIN...KA930455 with axle codes 20L, 21L, 22L and 23L (1983-93) ? Discovery I with ABS (1989-98)

Classic from VIN...GA399973 (1989-96)

Oil seal