Cylinder head - 12 cylinder models
chromed. Securing rocker covers and cylinder heads
Required: 1
RH
Required: 1
RH
Modern high tech version
Required: 1
LH
Modern high tech version
Required: 1
RH
Required: 1
LH
Required: 1
camshaft block to cylinder head
Required: 12
LH
Required: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Required: 4
long skirt version with 1.3/8" original diameter and 1" total height
Required: 24
with 1.3/8" original diameter and 7/8" total height
Required: 24
aftermarket with 1.3/8" original diameter and 7/8" total height
Required: 24
for Jaguar 4-valve engine AJ6 and 6.0 V12 (diameter 15.56 mm)
top, for exhaust valve
6.0 to engine no. 10462
Required: 24
top, for inlet valve and exhaust valve
6.0 from engine no. 10463
Required: 24
24 piece set double springs
Required: 2
made from 214N stainless steel. Diameter: 13,78", length: 105,8 mm
Required: 12
RH ('A' bank) - new item without valves and camshaft
Required: 1
LH ('B' bank) - new item without valves and camshaft
Required: 1
inlet valve +0.003" (1st oversize). Steel type
Required: 12
inlet valve +0.005" (2nd oversize). Steel type
Required: 12
inlet valve +0.005" (2nd oversize). Bronze/silicone type
Required: 12
exhaust valve +0.003" (1st oversize). Steel type
Required: 12
exhaust valve +0.005" (2nd oversize). Steel type
Required: 12
exhaust valve +0.005" (2nd oversize). Bronze/silicone type
Required: 12
cylinder head - stover style hexagon nut with 3/8" UNF thread and 9/16" AF spanner size
Required: 24
cylinder head - uprated flange nut with 3/8" UNF thread and 9/16" AF spanner size
Required: 24
cylinder head nut - uprated version
Required: 24
chromed dome nut with flat head, 7/16" UNF thread and 3/4" AF spanner size
Required: 28
cylinder head - uprated version
Required: 28
thermostat housing and idle air manifold to inlet manifold - aftermarket gasket made from sealing paper
Required: 4
thermostat housing and idle air manifold to inlet manifold - uprated AFM foam gasket
Required: 4
with connecting harness
Required: 1
oil pressure switch
Required: 1
feed pipe from block to cylinder head
Required: 1
oil feed pipe to head
Genuine type - 7/8" long
Required: 2
oil feed pipe to head
Repair bolt - 1.1/4" long
Required: 2
inlet, hardened
For lead free applications
Required: 12
exhaust, hardened
6.0 to engine no. 63495
For lead free applications
Required: 12
exhaust, hardened
6.0 from engine no. 63496
For lead free applications
Required: 12
