Clutch operating mechanism - TD and TF (1949-55)
for 7.1/4" clutches
TD to engine no. 9407 (1949-51)
Required: 1
for 8" clutches
TD from engine no. 9408 (1951-53) and TF (1953-55)
Required: 1
clutch - 5/8" diameter
TD to engine no. 9407 (1949-51)
Required: 1
3/4" diameter
TD from engine no. 9408 (1951-53) and TF (1953-55)
Required: 1
for 5/8" shaft
TD to engine no. 9407 (1949-51)
Required: 1
for 3/4" shaft
TD from engine no. 9408 (1951-53) and all TF (1953-55)
Required: 1
for clutch operating shaft with 5/8" diameter
TD to engine no. 9407 (1949-51)
Required: 2
for clutch operating shaft with 3/4" diameter
TD from engine no. 9408 (1951-53) and all TF (1953-55)
Required: 2
for clutch operating shaft with 5/8" diameter
TD to engine no. 9407 (1949-51)
Required: 2
for operating shaft with 3/4" diameter
TD from engine no. 9408 and all TF
Required: 2
clutch - for operating shaft with 5/8" diameter
TD to engine no. 9407 (1949-51)
Required: 1
for 3/4" operating shaft
TD from engine no. 9408 and all TF
Required: 2
operating shaft
TD to engine no.9407 (1949-51)
Required: 2
for bell housing access plate
Required: 1
TD to chassis no. 22250 (1949-52)
Required: 1
clutch cable
TD to chassis no. 22250 (1949-52)
Required: 1
retaining bracket clutch cable
TD to chassis no. 22250 (1949-52)
Required: 2
for LHD models
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
for RHD models
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
adjustable, with twin fork
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
for clutch operating shaft with 5/8" diameter
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch operating lever
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch operating lever in set with nut and washers
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
retaining clutch operating lever
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
retaining clutch operating lever
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
retaining clutch operating lever
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch rod
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch rod
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch rod
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch rod
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch rod
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
clutch return spring to sump
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
retaining clutch return spring to bracket
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
retaining clutch return spring to bracket
TD from chassis no. 22251 and all TF (1952-55)
Required: 1
for brake and clutch pedal on LHD models
Required: 1
used item for for LHD models
Required: 1
pedal shaft for clutch and brake pedal
Required: 2
for operating shaft with 3/4" diameter
Required: 2
retaining pedal - LHD models
Required: 1
for brake and clutch pedal on RHD models
Required: 1
pedal shaft for clutch and brake pedal
Required: 1
pedal shaft to chassis- RHD models
Required: 1
^brake and clutch pedal - made of aluminium
Required: 1
retaining clutch pedal extension - LHD models
Required: 2
retaining clutch pedal extension - RHD models
Required: 1
retaining clutch pedal extension - LHD models
Required: 2
retaining clutch pedal extension - RHD models
Required: 1
